Service manual

Disassembly and Reassembly
3-7
Samsung Electronics
3-3-4 Housing Ass’y Removal
1) Remove Belt Œ and 1 Screw ´.
2) Remove 1 Screw ˇ and lift up the Pulley Gear ¨.
3) Push the Hook ˆ in the direction arrow “A” and lift up Gear Tray Ø, Gear Housing ∏.
4) Push the 4 Hooks ” bottom side in the direction arrow “B” and lift up the Motor Load Ass’y ’.
5) Remove Clamper Ass’y ˝.
Fig. 3-11 Housing Ass’y Removal
ΠBELT
´ 1 SCREW
ˇ 1 SCREW
¨ PULLEY GEAR
ˆ HOOK
"A"
Ø GEAR TRAY
∏ GEAR HOUSING
’ MOTOR LOAD ASS'Y
˝ CLAMPER ASS'Y
<Bottom Side>
” 4 HOOKS
"B"
"B"
"B"
"B"