User Manual

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the or buttons, until the cursor is placed in front of the
VCR OUTPUT CH option.
5 Select the required output channel (CH21~CH69) by pressing the
or buttons.
6 On completion, press SETUP twice to exit the menu.
Then tune your television again (see page 13).
GB
Setting the DVD-VCR Output Channel
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the TV SYSTEM option.
5 Press the button to select G or K.
6 On completion, press SETUP twice to exit the menu.
Selecting the RF OUT Sound Mode
19
GB
18
Displaying/Hiding On-Screen Information
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and
Timer functions, which cannot be hidden).
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the
O S D option.
5 To... Press or , until...
Display on-screen information O N is displayed.
Hide on-screen information O F F is displayed.
6 On completion, press SETUP twice to exit the menu.
USER SET
E N T E R E ND:S E T U P
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
N I C A M : O N
E ND:S E T U P
LANGUAGE SET
E N T E R E ND:S E T U P
AUTO SET UP
MANUAL SET UP
TV SYSTEM : G
VCR OUTPUT CH : C H 3 6
AV2 SET : D E C
E ND:S E T U P
I N S T A L L A T I O N
E N T E R E ND:S E T U P
AUTO SET UP
MANUAL SET UP
TV SYSTEM : G
VCR OUTPUT CH : C H 3 6
AV2 SET : D E C
E ND:S E T U P
I N S T A L L A T I O N
E N T E R E ND:S E T U P
Choosing Your Language
You can change the language in which information is displayed on
the screen.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
LANGUAGE SET option.
3 Press the ENTER button to select this option.
Result: The LANGUAGE SET menu is displayed.
4 Select the required language by pressing the or buttons.
5 Press ENTER to store the language selected.
6 Press SETUP to exit the menu.
Result: From now on, all the on-screen information will be
displayed in the language selected.
E N G L I S H E S P A Ñ O L
D E U T S C H D U T C H
F R A N Ç A I S
I T A L I A N O
M E M O R Y:E N T E R
E N D:S E T U P