User Manual
GB
25
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode S P is displayed.
In long play mode
L P is displayed.
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
,
or , buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
4 Press the corresponding or buttons, until the cursor is placed
in front of the TAPE SELECT option.
5 Press the or buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6 Press SETUP twice to exit the menu.
Selecting the Recording Speed
T
ype Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
USER SET
E N T E R E ND:S E T U P
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
N I C A M
: O N
E ND:S E T U P
Setting the AV2 Connection
If you wish to use the AV2 socket for a PAY TV DECODER, you
must change AV2 to the required position.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the cursor is
placed in front of the
AV2 SET option.
5 When... Press or , until...
Another VCR or Satellite E X T is displayed.
receiver is connected to
the AV2 (DEC./EXT.) socket
The decoder is connected to DEC is displayed.
the AV2 (DEC./EXT.) socket
6 On completion, press SETUP twice to exit the menu.
The TV/VCR button allows you to record one channel with the VCR
while you watch another channel on the TV.
Your television...
On The television receives the picture from
the VCR and you can select channels
with the PROG (
or ) buttons on the
VCR or the remote contro
l.
Initial setting is ON.
Off (or the VCR is turned off) The television receives the picture from
your home aerial or cable television
system as it did before you connected
the VCR.
You can then use the
programme
( or
) buttons on your television to select
the channels.
GB
Switching between the TV and VCR Modes
24
AUTO SET UP
MANUAL SET UP
TV SYSTEM : G
VCR OUTPUT CH : C H 3 6
AV2 SET : D E C
E ND:S E T U P
I N S T A L L A T I O N
E N T E R E ND:S E T U P