User Manual

This function enables you to record up to nine hours (LP) of

programmes.

Your DVD-VCR stops automatically after the requested length of

time.

1 Switch on the television.

2 To monitor the programme being recorded, select the television

channel reserved for use with your DVD-VCR (or the AV input if

used).

3 Insert the cassette on which the programme is to be recorded,

with the window visible and the safety tab intact or the opening

covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4 Select:

◆

The station to be recorded using the

PROG( or )

buttons

◆ The AV1, AV2 or AUX source using the TV VIEW button for a

satellite tuner or external video source

Result: The channel number is displayed and the programme

can be seen on the television.

5 Select the recording speed by pressing the SPEED button as

many times as required (see page 25).

6 Hold the REC button (

) down for a while to start recording.

Result: The record indicator appears on the television screen

and DVD-VCR display. An index is recorded on the

tape (see page 37).

7 Press the REC button (

) several times to increase the

recording time in:

◆ 30-minute intervals up to four hours

◆ 1-hour intervals up to nine hours (LP)

Result: The length is displayed on the television displays. The

selected programme is recorded for the length of time

requested. At the end of that time, the DVD-VCR stops

recording automatically.

8 If you wish to cancel the recording before the end, press

STANDBY/ON.

☛ If the end of the tape is reached while recording:

◆ The recording stops

Recording a Programme with Automatic Stop

LENGTH 2:30

SET LENGTH :

PRESS REC

●