User Manual
GB
31
GB
30
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK
(
+ or -
)
buttons until the picture is clear and
stable.
Result: ◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
Adjusting Picture Alignment Manually
This function allows you to play back any pre-recorded cassette.
1 Switch on both the television and your DVD-VCR.
2 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press
ll
.
Otherwise, the cassette is played automatically.
➢ When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
3 To... Then press...
Stop the playback
■
(STOP).
Eject the cassette (EJECT).
Playing a Cassette
3
2
3
Adjusting Picture Alignment Automatically
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the ATR button.
Result: ◆ The tracking bar appears.
◆ The picture is automatically adjusted.
◆ The tracking bar disappears when digital auto tracking has
been completed.
Checking a Preset Recording
Cancelling a Preset Recording
You can cancel any programmes that are:
◆ Incorrect
◆ No longer required
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the ENTER button to select TIMER PROGRAMMING
option.
Result: The TIMER PROGRAMMING menu is displayed.
3 Select the programme to be cancelled by pressing the o r
buttons.
4 Press the CLEAR button to cancel the selected programme.
Result: All the recording information is deleted and the broad-
cast will not be recorded.
5 On completion, press SETUP twice.
You can check your preset recordings:
◆ When you have finished presetting the DVD-VCR
◆ If you have forgotten which programmes will be
recorded
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the ENTER button to select TIMER PROGRAMMING
option.
Result: The TIMER PROGRAMMING menu is displayed.
3 Press the or buttons to select the required programme.
4 Press the or buttons to select and change any values as
required. For more details, refer to the previous page.
5 On completion, press SETUP twice.
1/JAN MON 1 2 : 0 9
PR DAY START
S T O P
1 MO 1 1 2 : 0 0
→
1 2 : 5 0 SP
-- ---- - - : - -
→
- - : - - - -
-- ---- - - : - -
→
- - : - - - -
-- ---- - - : - -
→
- - : - - - -
-- ---- - - : - -
→
- - : - - - -
-- ---- - - : - -
→
- - : - - - -
S E T :
D E L E T E :C L E A R S E T U P
1/JAN MON 1 2 : 0 9
PR DAY START
S T O P
1 MO 1 1 2 : 0 0
→
1 2 : 5 0 SP
-- ---- - - : - -
→
- - : - - - -
-- ---- - - : - -
→
- - : - - - -
-- ---- - - : - -
→
- - : - - - -
-- ---- - - : - -
→
- - : - - - -
-- ---- - - : - -
→
- - : - - - -
S E T :
D E L E T E :C L E A R S E T U P
4