User Manual

GB
33
GB
32
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢ ◆ When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆ When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the COLOUR SYSTEM option.
5 Press the button to select A U T O ➝ P A L ➝ SECAM ➝
M E S E C A M ➝ B / W.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6 On completion, press SETUP twice to exit the menu.
Selecting the Colour Mode
USER SET
E N T E R E ND:S E T U P
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
N I C A M : O N
E ND:S E T U P
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the SETUP button on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the cursor is
placed in front of the
I P C option.
5 Press the button to select the IPC (intelligent picture control)
option.
➢ When intelligent picture control mode is
O N, the sharpness
of the image is adjusted automatically.
6 To adjust the sharpness manually, press the
button to turn the
IPC mode
O F F
.
7 Press the or buttons until the picture is displayed according to
your preferences.
➢ If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8 On completion, press the SETUP button again.
* *
P I C T U R E
* *
IPC : OFF
SOFTEN SHARPEN
- - - - - - - -
*
- - - - -
O N / O F F :
USER SET
E N T E R E ND:S E T U P
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
N I C A M : O N
E ND:S E T U P