User Manual
GB
39
GB
38
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
◆ Allows you to find the beginning of a sequence easily
☛ If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1 Insert a cassette in your DVD-VCR.
2 To set the tape counter to zero at the beginning of a sequence:
◆ Press DISPLAY twice to display the counter
◆ Press CLEARwhen you want to set the tape counter to zero
3 To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press
or
.
Result: The DVD-VCR stops automatically when the counter
reaches zero.
➢ Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 18).
Press DISPLAY:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
Using the Tape Counter
2
2
0 : 0 0 : 0 0
You can set Interval Repeat Play so that the cassette is repeated a
number of times according to a specified set interval.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
,
or , buttons to select the
EASY OPERATION option.
3 Press the ENTER button to select this option.
Result: The EASY OPERATION menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the
NO. OF INTERVAL REPEAT option.
5 To... Press , until...
Interval Repeat Play 5, 10, 15 is displayed.
(choose an interval repeat of
5, 10 or 15 times)
Cancel Interval Repeat Play O F F is displayed.
6 On completion, press SETUP twice to exit the menu.
7 To select Interval Repeat Play during playback, press the
REPEAT button at the desired start point.
Result: “INTERVAL REPEAT SETTING” is displayed.
Press the REPEAT button one more time at the desired
end point.
Result: The tape is automatically rewound to the start point.
“
INTERVAL REPEAT” is displayed.
Interval Repeat Play
You can set repeat play to repeat the tape continuously from
beginning to end.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
,
or , buttons to select the
EASY OPERATION option.
3 Press the ENTER button to select this option.
Result: The EASY OPERATION menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the REPEAT PLAY option.
5 To... Press or , until...
Repeat play O N is displayed.
Do not wish to repeat play O F F is displayed.
6 On completion, press SETUP twice to exit the menu.
Auto Repeat Play
EASY OPERATION
E N T E R E ND:S E T U P
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
E ND:S E T U P
EASY OPERATION
E N T E R E ND:S E T U P
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
E ND:S E T U P
1
2,3
7