User Manual

Using the Mark Function (DVD/VCD)

The Mark function lets you select parts of a DVD or VCD (MENU

OFF mode) so that you can quickly find the section at a later time.

1 During playback, press the MARK button on the remote. A marker

will be displayed.

2 Use the , button to move to the desired bookmark icon.

3 When you reach the scene you want to mark, press the ENTER

button. The icon will change to a number (1, 2, or 3).

4 Press the MARK button to turn off the display.

- - -

E N T E R

1 - -

PLAY

CLEAR

1 During playback, press the MARK button on the remote.

2 Use the , button to select a marked scene.

3 Press the

(PLAY/PAUSE) button to skip to the marked scene.

Recalling a Marked Scene

1 During playback, press the MARK button on the remote.

2 Use the , button to select the bookmark number you want to

delete.

3 Press the CLEAR button to delete a bookmark number.

Press the MARK button to turn off display.

➢ ◆ Up to three scenes may be marked at the same time.

◆ When in VCD 2.0 mode (MENU ON mode), this

function does not work.

◆ Depending on the disc, the Bookmark function may

not work.

Clearing a Mark

When a DVD contains multiple angles of a particular scene, you

can select the Angle function.

Using the ANGLE button :

Check to see if an ‘ANGLE ( )’ mark is present at the upper

right hand corner of the screen.

1 When an ‘ANGLE’ mark is shown, press the ANGLE button.

2 Use the

button to select the desired screen angle. Then

press the ENTER button.

3 To turn off the display, press the ANGLE button again.

Changing the Camera Angle

4/4

(example)