User Manual

GB
57
GB
56
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing
you to select various language preferences, set up a parental level,
even adjust the player to the type of television screen you have.
1 With no disc playing, press the SETUP button on the remote.
Player Menu
➀
Setup of the Display. Language (See page 58)
Use the Player preference menu to select the
language for the player’s on-screen displays.
Disc Menu
➁
Setup of the Menu Language (See page 58)
Use the Menu preference menu to select the
language you want a DVD’s disc menu to be
displayed in.
Audio
➂
Setup of the Audio Language (See page 59)
Use the Audio preference menu to select the
soundtrack language.
Subtitle
➃
Setup of the Subtitle Language (See page 59)
Use the Subtitle preference menu to select the
language the disc’s subtitles are to be displayed
in.
Parental
➄
Setup of the Parental Level (See page 60)
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as
those with violence, adult subject matter, etc.
Audio Options
➅
Setup of the Audio Options (See page 61)
Display
➆
Setup of the Display Options (See page 62)
Options Use to select which type of screen you want to
watch and several display options.
2 Use the , button on the remote to access the different
features.
3 Press the ENTER button to access the sub features.
To make the setup screen disappear after setting up, press the
SETUP button again.
➢ Depending on the disc, some Setup Menu selections
may not work.
SETUP MENU
1 Player Menu English
2 Disc Menu English
3 Audio English
4 Subtitle Automatic
5 Parental Unlocked
6 Audio Options
7 Display Options
1 During playback or pause mode, press the ZOOM button on the
remote. A square will be displayed on screen.
2 Use the , or , button to select the part of the screen you
want to zoom.
3 Press the ENTER button.
- During DVD playback, press ENTER to zoom in 2X/4X/normal in
order.
- During VCD playback, press ENTER to zoom in 2X/normal in
order.
The simulated surround effect (SPATIALIZER N-2-2) depends on
the disc contents. If you connect the unit to your stereo system,
you can enhance sound quality and produce a greater surround
effect.
This feature is useful when you are using the DVD player with a
two channel stereo through the analog outputs.
(Discs which are recorded with LPCM or DTS will not work.
When the DOLBY DIGITAL OUT or MPEG-2 DIGITAL OUT are
set to BITSTREAM in the SETUP MENU, the 3D Sound function
will not work.)
1 During playback, press the 3D SOUND ( ) button. The 3D
SOUND mark will be displayed on screen. (Be sure the DOLBY
DIGITAL OUT or MPEG-2 DIGITAL OUT are set to PCM.)
2 Press the , button to turn the 3D Sound feature on or off.
➢ ◆ 3D Sound is possible only on discs recorded using
DOLBY SURROUND or DOLBY DIGITAL. However,
some of these discs do not contain rear channel
sound signals.
◆ Depending on the disc, the Zoom and 3D Sound
function may not work.
3D Sound Function
Using the Zoom (DVD/VCD)
Off
1