Samsung SCX-4x25 Laser MFP series - User Guide

Using Your Printer with a Macintosh
42
Scanning
You can scan docoments using Image Capture program.
Macintosh OS offers
Image Capture program.
Scanning with USB
1 Make sure that your machine and computer are turned on
and properly connected to each other.
2 Place a single document face down on the document glass.
OR load the document(s) face up into the ADF (or DADF).
3 Start Applications and click Image Capture .
N OTE : If No Image Capture device connected message
appears, disconnect the USB cable and reconnect it. If the
problem persists, please refer to the Image Capture ’s help.
4 Set the scan options on this program.
5 Scan and save your scanned image.
N OTE :
• For more information about using
Image Capture , please
refer to the
Image Capture ’s help.
• Use TWAIN-compliant software to apply more scan options.
• You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.(Only for Macintosh OS X 10.3.9 or above)
• Scan process differ according to TWAIN-compliant
softwares. Please refer to the user’s guide of the software.
• When scanning does not operate in
Image Capture , update
Mac OS to the latest version.
Image Capture operates
propery in Mac OS 10.3.9 or higher and Mac OS 10.4.7 or
higher.
Scanning with network
1 Make sure that your machine and computer are turned on.
2 Place a single document face down on the document glass.
OR load the document(s) face up into the ADF (or DADF).
3 Start Applications and click Image Capture .
4 For Mac OS 10.4~10.5, click Devices and click Browse
Devices
.
For Mac OS 10.6, select your device below
SHARED . Skip
to step 7.
5 For Mac OS X 10.4, select your machine in Twain devices
option. Make sure that
Use TWAIN software checkbox is
checked, and click
Connect .
•If a warning message appears, click
Change Port.. to
select port.
•If TWAIN UI appears, from the
Preference tab, click
Change Port.. to select port.
N OTE : Refer to Scan Manager for Change Port.. use (See
your Printer User’s Guide).
For Mac OS X 10.5~10.6, make sure that
Connected
checkbox is checked beside your machine in
Bonjour
Devices
.
If you want to scan using TWAIN, refer to the Mac OS X
10.4 procedure above.
6 Set the scan options on this program.
7 Scan and save your scanned image.
N OTE :
• For MAC OS X 10.3, use TWAIN-compliant softwares.
• Use TWAIN-compliant software to apply more scan options.
• For more information about using
Image Capture , please
refer to the
Image Capture ’s help.
• You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.(Only for Macintosh OS X 10.3.9 or above)
• Scan process differ according to TWAIN-compliant
softwares. Please refer to the user’s guide of the software.
• When scanning does not operate, update Mac OS to the
latest version. Scanning operates properly in Mac OS 10.4.7
or higher.
Setting scan information in Scan
Manager.
You can find out about Scan Manager program information
and installed scan driver's condition. Also, you can change scan
settings and add or delete the folders where scanned
documents to computer are save in
Scan Manager program.
1 Open Scan Manager in Smart Panel menu on Status
bar.
2 Set Scan Button allows you to change the saving
destination and scan settings, add or delete application
program and format files. You can change the scanning
machine by using Change Port.. . (Local or Network)
3 Press OK after setting is done.