User guide

SVMi-20i Administration Guide

3-211

Item

Description

Retrieve(DO NOT USE)

The digit(s) dialed by the system to retrieve a caller

from hard hold.

Transfer(DO NOT USE)

The digits to dial to place a caller on consultation hold

(when transferring a caller from one extension to

another) and get a dial tone.

Connect(DO NOT USE)

The digits to dial to complete a call transfer and

connect the caller to the called party.

Reject(DO NOT USE)

The digits the system dials to abort a call transfer if

the called party rejects the call.

No answer(DO NOT USE)

The digits the system dials to abort a call transfer

which resulted in a no answer condition.

Busy(DO NOT USE)

The digits the system dials to abort a call transfer

which resulted in a busy signal.

Error(DO NOT USE)

The digits the system dials to abort a call transfer if an

error occurs such as no dial tone.

Initiate(DO NOT USE)

The dial string used to initiate a conference call.

Abort(DO NOT USE)

The dial string used to abort a conference call if the

second station does not answer.

Set up(DO NOT USE)

The dial string used to set up a conference call after

the second station answers.

Tear down(DO NOT USE)

The dial string needed to tear down a conference call

and drop the second station.