USER MANUAL SWA-9000S
Safety Information Thank you for purchasing this product (SWA-9000S). CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
•• To protect this apparatus from a lightning •• Contact an authorized service center for storm, or when it is left unattended and information if you intend to install your unused for long periods of time, unplug it from product in a location with heavy dust, high or the wall outlet and disconnect the antenna or low temperatures, high humidity, chemical cable system. This will prevent damage to the substances, or where it will operate 24 hours set due to lightning and power line surges.
WARNING : •• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. •• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. •• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. FCC NOTE (for U.S.A): FCC Supplier’s Declaration of Conformity Responsible Party - U.S. Contact Information: Samsung Electronics America, Inc.
Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:www.samsung.com/ recycling Or call, 1‐800‐SAMSUNG WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov. Precautions 1. Ensure that the AC or DC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product.
Accessories WIRELESS STANDBY LINK Surround Speaker Cable Power Cord Wireless Dongle Speaker (2EA) (2EA) (3903-001117) (WHM520V) (AH81-02137A) (AH59-02751B) Wireless Screw (2EA) Holder-Dongle Holder-Dongle Toroidal Ferrite Core Receiver (6001-002755) (Stand Type) (Wall mount Type (3301-000144) (AH61-04175A) / One Mount Type) Module (AH61-04176A) •• The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung Soundbars, see page 12.
NOTES –– S amsung Electronics Co., Ltd reserves the right to change the specifications without notice. –– Weight and dimensions are approximate. –– For more information about the power supply and power consumption, refer to the label attached to the product. –– Design and specifications are subject to change without prior notice. Open Source License Notice •• To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
2. Check the standby status after plugging into an electrical outlet Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, refer to step 8 on page 11.
3. Connect the main unit of the Soundbar to the Wirless Dongle Connect the wireless dongle to the “WIRELESS” port on the Soundbar main unit. •• When inserting the Wireless Dongle into the holder, make sure that the “WIRELESS” logo is facing up, as shown in the pictures below. •• For Soundbar “HW-N8xx” model, skip this step and proceed to the next.
4. Turn off the Soundbar Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on the main Soundbar unit. BYE •• The image of the Soundbar may differ from your Soundbar, depending on the model. 5. Configure “ID SET” using the Soundbar’s remote control Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears on your Soundbar’s display. •• Steps for “ID SET” may vary by the Soundbar model. Please read manual for your Soundbar.
7. Check if the LINK LED is solid blue (connection complete) STANDBY The LINK LED indicator stops blinking and glows a solid blue when a LINK STANDBY LINK connection is established between the Soundbar and the Wireless Receiver Module. Blue is On 8.
CAUTIONS •• If you have connected your Soundbar and one or more Samsung Wireless Speakers via a wireless router: Disable the surround sound for the Soundbar and Samsung Wireless Speaker, and then install and use the SWA-9000S. •• If you connect the SWA-9000S and do not disable surround sound as described above: Sound will be played via both the Samsung Wireless Speakers and the SWA-9000S’s surround speakers. Compatible Models •• Compatible with select Samsung Soundbar.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
QUESTIONS OR COMMENTS? AREA IN THE US CALL 1-800-SAMSUNG (726-7864) OR VISIT US ONLINE AT WRITE www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 © 2017 Samsung Electronics Co., Ltd. All rights reserved.
