USER MANUAL SWA-9000S
Safety Information Thank you for purchasing this product (SWA-9000S). CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
•• Maintenance of Cabinet. •• Route power-supply cords so that they are –– Before connecting other components to not likely to be walked on or pinched by items this product, be sure to turn them off. placed on or against them. Pay particular •• Be sure to pull the power plug out of the attention to cords at the plug end, at wall outlets, and the point where they exit from outlet if the product is to remain unused or the apparatus.
Precautions •• Do not install the product in an unstable location such as a shaky self, a slanted floor, 1. Ensure that the AC or DC power supply or a location exposed to vibration. in your house complies with the power •• Do not drop or strike the product. If the requirements listed on the identification product is damaged, disconnect the power sticker located on the back of your product. cord and contact a service centre.
Important Safety Instructions 10. Protect the power cord from being walked on or pinched particularly at plugs, Read these operating instructions carefully convenience receptacles, and the point before using the unit. Follow all the safety where it exits the apparatus. instructions listed below. Keep these operating 11. Only use attachments/accessories specified instructions handy for future reference. by the manufacturer. 1. Read these instructions. 12. Use only with the cart, 2.
Accessories WIRELESS STANDBY LINK Wireless Surround Speaker Cable Speaker (2EA) (2EA) Screw (2EA) Holder-Dongle Holder-Dongle (Stand Type) (Wall mount Type Receiver Power Cord Wireless Dongle (WHM520V) Toroidal Ferrite Core / One Mount Type) Module •• The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung Soundbars, see page 12. Do not connect the dongle to any other devices, such as smartphones, desk-top PCs, or notebook PCs.
NOTES –– S amsung Electronics Co., Ltd reserves the right to change the specifications without notice. –– Weight and dimensions are approximate. –– For more information about the power supply and power consumption, refer to the label attached to the product. –– Design and specifications are subject to change without prior notice. Open Source Licence Notice •• To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
2. Check the standby status after plugging into an electrical outlet Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, refer to step 8 on page 11.
3. Connect the main unit of the Soundbar to the Wirless Dongle Connect the wireless dongle to the “WIRELESS” port on the Soundbar main unit. •• When inserting the Wireless Dongle into the holder, make sure that the “WIRELESS” logo is facing up, as shown in the pictures below.
4. Turn off the Soundbar Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on the main Soundbar unit. BYE •• The image of the Soundbar may differ from your Soundbar, depending on the model. 5. Configure “ID SET” using the Soundbar’s remote control Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears on your Soundbar’s display.
7. Check if the LINK LED is solid blue (connection complete) STANDBY The LINK LED indicator stops blinking and glows a solid blue when a LINK STANDBY LINK connection is established between the Soundbar and the Wireless Receiver Module. Blue is On 8.
CAUTIONS •• If you have connected your Soundbar and one or more Samsung Wireless Speakers via a wireless router: Disable the surround sound for the Soundbar and Samsung Wireless Speaker, and then install and use the SWA-9000S. •• If you connect the SWA-9000S and do not disable surround sound as described above: Sound will be played via both the Samsung Wireless Speakers and the SWA-9000S’s surround speakers.
© 2017 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre. Area Contact Centre Web Site ` Asia Pacific CHINA HONG KONG 400-810-5858 www.samsung.com/cn/support 3698 4698 www.samsung.com/hk/support (Chinese) www.samsung.com/hk_en/support (English) MACAU 0800 333 www.samsung.com/support SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.