MagicLAN User Manual

3. MagicLAN Installation For

Windows 98/ME/NT4.0/2000/XP

We will explain the installation method for SWL-2200C(CF Card)

3.1 Installation Overview

Here are some steps you will perform in establishing your wireless network connection:

1. Install the Access Point at first. AP is needed in case of Infrastructure network

mode.

2. You should install the Wireless LAN Card (SWL-2200C).

3. Install the software using the Installation CD.

4. Install the network protocol(s) required to communicate on your network. Most

likely you will need the TCP/IP protocol.

3.2 Installation Procedure of Windows 98

Please follow the following steps one by one to install the CF Card successfully.

< Method 1 - Inserting card first >

1. Insert the CF Card into the PCMCIA slot of your computer.

Add New Hardware Wizard

appeared and the system looks for “SAMSUNG-

11Mbps WLAN Card”. Press

button and check if

Search for the best

driver for your device(recommended)

is slected and then press

button .

Insert the MagicLAN Installation CD into the CD-ROM drive.

3. Mark the

Specify a location

tap and type “

E:\Drivers

” right below in this

tap(Where E is the CD-drive of your PC).