Spec Sheet
FEATURES
› 3 × 100/1000Base-FX SFP
8 × 10/100Base-TX RJ45
› 2 × SFP ports also support 2.5 Gbps SFP modules for
high speed communication
› 8 × IEEE802.3at compliant 30 W PoE+ ports,
with 4 x ports supporting 60 W PoE++
Total PoE budget 240 W
› Fast Redundancy/Recovery – MSTP/RSTP/STP (IEEE802.1s/w/D)
and ERPS G.8032
› Layer 3 static routing
› Supports IPV6 new internet protocol version
› Provided HTTPS/SSH protocol enhances network security
› Supports Device Binding security function
› Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network
Management
› Supports ACL, 802.1x User Authentication for security
› Supports 9.6K Bytes Jumbo Frame
› Web-based, Telnet and Console (CLI) configuration
› Designed for wall or DIN rail mount
installations
SOFTWARE FEATURES
› Port Guardian prevents network intrusion through intelligent
physical port lockout
› STP/RSTP/MSTP (IEEE 802.1D/w/s)
› Ethernet Ring Protection Switching (ERPS) (G.8032)
› Quality of Service (802.1p) for real-time traffic
› VLAN (802.1Q) with VLAN tagging and GVRP supported
› IGMP v2/v3 (IGMP snooping support) and MLD v1/v2 for
filtering multicast traffic
› Supports IP-based bandwidth management
› Supports application-based QoS management
› Port configuration, status, statistics, monitoring, security
› DHCP Client/Server, DHCP Snooping, DHCP Relay
› Custom User Access Rights (15 Levels)
› Static and LACP Link Aggregation
› Supports Loop Protection function
› Multicast VLAN Registration (MVR)
› Supports IP Multicast Profile (IPMC)
› Link Layer Discovery Protocol (LLDP)
› Voice VLAN support
› UPnP (Universal Plug and Play)
GUARDIAN
The SWT-F11MGHP has three 100/1000Base-FX SFP* ports and eight 10/100Base-TX ports.
Two of the SFP ports support 2.5 Gbps SFPs for high-speed communication in bandwidth-
intensive applications. All SFP ports utilize SFP modules for fiber and connector type, and
distance selection. The Port Guardian feature provides additional cybersecurity protection by
enabling physical port lockout in the event that an existing cable is disconnected and prevents a
potential network incursion using common spoofing techniques. The intrusion event is
reported back to the operator using SNMP. The switch offers multiple Ethernet redundancy
protocols which protect your applications from network interruptions or temporary
malfunctions by redirecting transmission within the network. Advanced IP-based management
can limit the maximum bandwidth for each connected IP device, allowing the user to adjust
usage. The SWT-F11MGHP provides eight electrical ports supporting up to 30 watts of PoE+
power, and four of the eight PoE ports can support up to 60 watts of PoE power. All PoE ports
are IEEE802.3af/IEEE802.3at compliant.
Environmentally Hardened Managed Layer 2+ Ethernet Switch
3 SFP* + 8 Electrical Ports with 60 Watt PoE++
SWT-F11MGHP
*
Small Form-Factor Pluggable (SFP) Module. Sold separately.
8
2
3
-40º TO
+
75º IEEE802.3at FLEXIBILITY
UPLINKSPORT
FIRST EDITION 06-2020 © 2020 Hanwha Techwin Co., Ltd. All rights reserved.