Spec Sheet

SWT-F0803MG Series
Environmentally Hardened Managed Layer 2+ Ethernet Switch
3 SFP + 8 Electrical Ports with 60 Watt PoE
SPECIFICATIONS
ORDERING INFORMATION
Part Number Description
SWT-F11MGHP Industrially Hardened 11 Port Managed Ethernet Switch
Options
User selection of Wisenet SFP (see Wisenet SFP
Modules datasheet for product numbers and compatibility before ordering)
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product
specifications are subject to change without notice.
Connectors
RJ-45 Copper Ports
SFP¹ Ports
Serial Console Port Power
Fault Relay
8 x 10/100Base-TX Ports
Ports 1-4 60 W PoE, Ports 1-8 30 W PoE
2 x 100/1000/2500Base-FX, 1 x 100/1000Base-FX
USB Type B Connector (115200bps, 8, N, 1)
2 x 2 Pin Terminal Block
3-Pin Terminal Block
Switch Properties
Switching latency 7 µs
Switching bandwidth 13.6 Gbps
DRAM 1GB
Flash 128Mb
VLANs Voice, Private, Multicast
Max. Available VLANs 256
IGMP multicast groups 128 for each VLAN
Port rate limiting User Defined
Processing Store-and-Forward
Priority Queues 8
Network Redundancy STP RSTP MSTP ERPS
MAC Table 8K MAC Addresses
Jumbo Frame Up to 9.6K Bytes
Static Routing 32 Routes
Security Features
Device Binding security feature
Enable/disable ports, MAC based
port security
Port based network access control
(802.1x)
VLAN (802.1Q) to segregate and
secure network traffic
Radius centralized password
management
SNMPv3 encrypted authentication
and access security
HTTPS / SSH enhance network
security
Switch/port based, NAS, ACL, ARP
inspection and IP sourceguard
AAA radius server authentication
TACACS+
SNTP
Power
Input Power
Redundant 48 to 57 VDC , Hardened High Temp
480 W
DIN Rail Power Supply Included
Power Consumption
250 W Max with PoE++, 240 W PoE Budget
Overload Current Protection Present
Reverse Polarity Protection Present
Mechanical
Indicating LEDs
Size (H × W × D)
Installation
Weight
Power/Fault Indicators
Alarm Indicator RJ45 Port Indicator
SFP Port Indicator PoE Indicators
6.0 × 3.5 × 4.5 in (15.24 × 8.89 × 11.43 cm)
DIN-Rail or Wall Mount
2.6 lb / 1.2 kg
Environmental
Storage Temperature -40 to +85º C
Operating Temperature -40 to +75º C
Operating Humidity 5% to 95% Non-condensing
MTBF >100,000 hours
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.3at for Power Sourcing Equipment (PSE) and PoE up to 30 watts per port
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3az Energy Efficient Ethernet
ITU-T G.8032v1/v2 Ethernet Ring Protection Switching (ERPS)
Regulatory Compliance
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-
4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Rail EN50121-4
Traffic NEMA TS2
A
GENCY COMPLIANCE
FIRST EDITION 06-2020 © 2020 Hanwha Techwin Co., Ltd. All rights reserved.
100/1000
SFP Ports¹
10/100
RJ45 Ports
30W PoE+
Ports
60W PoE++
Ports
3 8 8
4