User Manual

English-117
1
Press the SOURCE button to select “PC”.
2
Press the MENU button. Press the or button to select “Setup”,
then press the ENTER button.
3
Press the or button to select “PC”, then press the ENTER button.
4
Press the or button to select “Image Reset”, then press the
ENTER button. The picture settings are replaced with the factory
default values.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
Initializing the Picture Settings
You can replace all picture settings with the factory default values.
BN68-01047F-00Eng.qxd 7/14/06 5:19 AM Page 117