User Manual

English-29
1
Press the MENU button. Press the or button to select “Setup”,
then press the ENTER button.
2
Press the or button to select “Clock”, then press the
ENTER button.
The Clock can be set automatically if you are receiving a digital signal.
4
Press the or button to select “Time Zone”, then press the
ENTER button.
Press the or button to highlight the time zone for your local area
(and to move the highlight to the appropriate time zone on the map of the
United States), then press the ENTER button.
5
Press the or button to select “DST”(Daylight Saving Time), then
press the
ENTER button.
Press the or button to select “On” or “Off”, then press the
ENTER button.
Select “Return” by pressing the
or button, then press the
ENTER button to return to the previous menu.
Press the
EXIT button to exit.
3
Press the or button to select “Clock Mode”, then press the
ENTER button. Press the or button to select “Auto”, then press
the ENTER button.
Option 2: Setting the Clock Automatically
• When you set up Auto Time, the set time may not be correct depending
on the broadcasting station and signal. If there is a difference between
the real time and set time, please set the time manually.
BN68-01047F-00Eng.qxd 7/14/06 5:16 AM Page 29