User Manual

English-53
1
Press the MENU button. Press the or button to select “Sound”,
then press the ENTER button.
2
Press the or button to select “Mode”, then press the ENTER button.
Press the or button again to select “Mode”, then press the
ENTER button. Press the or button to select a particular item
(Standard, Music, Movie, Speech, Custom), then press the ENTER button.
4
To return the factory defaults, select “Reset” by pressing the or button.
Press the
ENTER button.
Press the or button to select “OK” or “Cancel”, then press the
ENTER button.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
3
Press the button. Press the or button to select a particular item
(Balance, 100Hz, 300Hz, 1kHz, 3kHz, 10kHz) to be changed, then
press the ENTER button.
Press the or button to increase or decrease the selected frequency.
Press the ENTER button.
• The equalizer function is set for each mode (Standard, Music, Movie,
Speech, or Custom).
L/R Sound Balance Adjustment
To adjust the sound balance of the L/R speakers.
Bandwidth Adjustment (100Hz, 300Hz, 1kHz, 3kHz, 10kHz)
To adjust the level of different bandwidth frequencies.
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
Alternate method
Press the S.MODE button on the remote control
repeatedly to select one of the sound settings.
BN68-01047F-00Eng.qxd 7/14/06 5:18 AM Page 53