User Manual

English-64
Using the V-Chip
Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user).
The on-screen menu will instruct you to assign a password (you can change it later, if necessary).
1
Press the MENU button. Press the or button to select “Setup”,
then press the ENTER button.
Press the or button to select “V-Chip”, then press the
ENTER button.
2
Press the button. Press the number buttons to enter your current
4-digit PIN. (The default PIN for a new TV set is “0000”.)
The “V-Chip” menu is displayed.
3
Press the or button to select “Change PIN”, then press the
ENTER button.
4
Press the button. Press the number buttons to enter your new
4-digit PIN. Re-enter your new PIN to confirm.
The message will automatically disappear, and return to the previous
menu after a few seconds, even if the
ENTER button is not pressed.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the
EXIT button to exit.
The PIP doesn’t function when the V-Chip is active.
If you forget the pin number, press the remote control buttons in the following sequence,
which resets the pin to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).
The V-Chip function only works in TV, AV mode and S-Video mode.
How to Change Your Password
BN68-01047F-00Eng.qxd 7/14/06 5:18 AM Page 64