User manual

14
English
Connections
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎ Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER  button. Plug & Play is available only when the Input Source is set to TV.
✎ Before turning on the TV, make sure the antenna cable is connected.
1
Selecting the OSD Language.
Press the ▲ or ▼ button, then press the ENTER
E button. Select the desired
OSD (On Screen Display) language.
2
Setting up the Network
Set up your network connection. Press the ENTER
E button to start. If you do not
know your network set up information or want to set to it later, select Skip. You can
set up the network connection later using the Network menu.
✎ When network connection settings are complete, Software Upgrade is
available. Select Next to upgrade TV software. Your TV will automatically
upgrade, if your TV need a software upgrade. If you want to upgrade later,
select the Skip.
3
Selecting the usage mode
Press the ▲ or ▼ button to select Home Use, and then press the ENTER

button twice.
y Select the Home Use mode. Store Demo mode is for retail environments.
4
Select Country
Press the ▲ or ▼ button, then press the ENTER
 button. Select the
appropriate country.
5
Setting the Clock Mode
Press the ▲ or ▼ button to select Auto or Manual, then press the ENTER

twice.
✎ If you selected Manual, you’ll go to the Date and Time screen. Select Date
or Time, and then press ENTER
 . Then, use the number buttons or the
▲ or ▼button to set the date or time. Use the◄ or ►button to move
between entry fields. When done setting the Date and Time, select Next,
and then press ENTER

6
Selecting search options for auto
tuning
Press the ▲ or ▼ button, then press the ENTER  button. Select the channel
source to memorise. When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Tuning.
✎ Press the ENTER  button at any time to interrupt the memorisation
process.
7
Enjoy your TV. If you want to watch a broadcast programme, select Close. If you want to enjoy
the Smart Hub, select the Smart Hub.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0"(except France).
If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play (MENU → System) again at home although you did in shop.
✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0”(France: “1-1-1-1”): POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
Connections
ANT IN
DC 14V
TA750
TA950
Cable
ANT OUT
Power Input