User manual

29
English
Basic Features
Transfer Channel List
The PIN input screen appears. Enter your 4 digit PIN number.
Imports or exports the channel map. You should connect a
USB storage to use this function.
Import from USB: Import channel list from USB.
Export to USB: Export channel list to USB. this function
is available when USB is connected.
Fine Tune
(analogue channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
Settings are applied to the channel you’re currently
watching.
Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner
To reset the fine-tuning, select Reset.
Edit Channel Number (Disable / Enable)
(depending on the country) (Italy only)
Use this to change channel number. When channel number
is changed, channel information is not updated autumatically.
Picture Menu
Changing the Preset Picture Mode
MENU
Picture Picture Mode ENTER
Picture Mode
Select your preferred picture type.
In HDMI1/DVI mode (when a PC is connected), Picture
Mode can be set to Standard or Entertain only.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural: Suitable for reducing eye strain.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
Available in HDMI1/DVI mode (when a PC is
connected) only.
Adjusting Picture Settings
MENU
Picture ENTER
Samsung MagicAngle
This feature allows you to see optimal screen quality
according to your viewing position. When viewing the screen
at an angle from below, above or the side of the product,
by setting the appropriate mode for each position you can
obtain a similar picture quality as viewing the screen directly
from the front.
Off: Select when viewing from the front position.
Lean back mode: Select when viewing from a slightly
lower position.
Standing Mode: Select when viewing from the upper
position.
Mode (1-10): Determines the amount of adjustment.
Numbers closer to 10 are best for lower viewing
positions.
When Samsung MagicAngle is set to Lean back
mode or Standing Mode, Gamma is not available.
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
NOTE
x
In analogue TV, Ext., AV modes of the PAL system,
the Tint (G/R) function is not available.
x
In HDMI1/DVI mode (when a PC is connected), only
Backlight, Contrast, Brightness and Sharpness
are available for adjustment.
x
Settings can be adjusted and stored for each
external device connected to the TV.