User manual

7
Getting Started
English
 Cleaning Related
Warning
!
Before cleaning the product, unplug
the power cord.
y Otherwise, it may result in
electric shock or fire.
When cleaning the product, do not
spray water directly over the product
parts.
y Make sure that water does not
enter the product.
y Otherwise, it may result in fire,
electric shock or a problem with
the product.
Caution
Avoid spraying cleansing agent
directly onto the product.
y This may result in discoloration
or cracking of the exterior of the
product or the panel coming off.
!
When cleaning the product, disconnect
the power cord and clean the product
with the supplied cleaning cloth.
y Avoid using chemicals such as
wax, benzene, alcohol, thinner,
mosquito-repellent, fragrance,
lubrication or cleansing agent when
cleaning the product.
 This may result in the exterior
being deformed or the print being
removed.
!
If you can't get the product clean
with just the supplied cloth, use a
soft, damp cloth with a "monitor-
exclusive cleansing agent" and wipe
the product with it.
y If no monitor-exclusive cleansing
agent is available, dilute a
cleansing agent with water at a
ratio of 1:10 before cleaning the
product.
!
Since the exterior of the product is
easily scratched, be sure to use the
supplied cleansing cloth.
 Usage Related
Warning
Since a high voltage runs through the
product, never disassemble, repair or
modify the product yourself.
y Otherwise, it may result in fire or
electric shock.
y If the product needs to be fixed,
contact a service centre.
!
To move the product, turn the power
off and unplug the power cord, the
antenna cable and any other wires
connected to the product.
y Otherwise, it may result in
electric shock or fire due to the
damaged power cord.