Operation Manual

To use the Position function after selecting Wide Zoom, Zoom or Screen Fit, follow these steps:
1. Select the Position.
2. On the Position screen, select Position, and then move the picture to position you want using your remote.
3. When done, select Position again, and then select Close.
4. To reset the picture position, select Reset.
Picture Sizes available by Input Source:
– ATV, EXT, AV: Auto Wide, 16:9, Wide Zoom, Zoom, 4:3
– DTV (576i/p, 720p): Auto Wide, 16:9, Wide Zoom, Zoom, 4:3
– DTV (1080i, 1080p): Auto Wide, 16:9, Wide Zoom, Zoom, 4:3, Screen Fit
– Component (480i/p, 576i/p, 720p): 16:9, Wide Zoom, Zoom, 4:3
– Component (1080i, 1080p): 16:9, Wide Zoom, Zoom, 4:3, Screen Fit
– HDMI (480i/p, 576i/p): 16:9, Wide Zoom, Zoom, 4:3
– HDMI (720p, 1080i, 1080p): 16:9, Wide Zoom, Zoom, 4:3, Screen Fit
✎
Depending on the input source, the picture size options may vary.
✎
The available items may differ depending on the selected mode.
✎
HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
✎
You can adjust and store settings for each external device you have connected to an input on the product.
• 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can
determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European
country requires different picture size.
✎
Not available in HDMI, Component, and HDMI/DVI mode.
English - 30 English - 31
Basic Features