Operation Manual

Issues Solutions and Explanations
The Anynet+ device does not
play.
You cannot use the play function when Setup is in progress.
The connected device is not
displayed.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On. (System → Anynet+ (HDMI-CEC))
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make sure the device is connected to your
product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please repeat the device scan.
✎
Some functions and pictures shown in this manual are available on specific models only.
✎
To keep your product in optimum condition, upgrade to the latest firmware on the Samsung web site by USB
(samsung.com → Support → Downloads).
English - 75English - 75
Other Information