Installation Manual

ManualsBrandsSamsung ManualsNDAA16 Channel Ethernet over Coax Extender With Pass-Through PoE

INS_TE(C,U)-FX 08/12/19 PAGE 1

INSTALLATION AND OPERATION MANUAL TE(C,U)-F SERIES

TE(C,U)-F Series

ETHERNET OVER COPPER EXTENDER WITH

PASS-THROUGH POE UP TO 15 WATTS

The Ethernet over copper line supports up to sixteen channels of 10/100Mbps

Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over

coaxial cable. The single channel units may be powered by a PoE switch or the

included power supply. Four and sixteen channel units operate from local power.

These units provide the ultimate flexibility for extending a powered device (PD)

over long distance copper. DIP switches are provided for user-selection of local or

remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.

The TE(C,U)-F16 are 1RU rack mountable units. The TE(C,U)-F04 units are

interchangeable between stand-alone or card mount configurations, or may be DIN-

rail mounted by the addition of model SBP-UDR. The TE(C,U)-F01 units are stand-

alone, or may be DIN-rail mounted by the addition of model SBP-UDR adaptor.

This manual serves the following

Model Names:

TEC-F01

TEC-F04

TEC- F16

TEU-F01

TEU-F04

TEU - F16

Summary of content (11 pages)

PAGE 1
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series TE(C,U)-F Series ETHERNET OVER COPPER EXTENDER WITH PASS-THROUGH POE UP TO 15 WATTS This manual serves the following Model Names: TEC-F01 TEC-F04 TEC-F16 TEU-F01 TEU-F04 TEU-F16 The Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply.
PAGE 2
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series FIGURE 1 – TEC-F01 SINGLE CHANNEL COAX UNIT ETHERNET EXT DISTANCE Black (AC or DC–) Black w/ White Stripe (AC or DC+) Power: Operates on PoE power OR 9 to 36 VDC OR 24 VAC Power Consumption: 1.
PAGE 3
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series FIGURE 3 – TEC-F04 FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT CH1 ETHERNET CH1 EXT DISTANCE CH2 ETHERNET CH2 EXT DISTANCE CH3 ETHERNET CH3 EXT DISTANCE CH4 ETHERNET CH4 EXT DISTANCE Black (DC-) Black w/ White Stripe (DC+) Operating Power: 9 to 15 VDC Power Consumption: 5W FIGURE 4 – TEC-F04 FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT Local/Remote push button See Installation Instructions, Step 3 Local/Remote DIP switch See Installation I
PAGE 4
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series FIGURE 5 – TEU-F04 FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS CH1 ETHERNET CH1 EXT DISTANCE CH2 ETHERNET CH2 EXT DISTANCE CH3 ETHERNET CH3 EXT DISTANCE CH4 ETHERNET CH4 EXT DISTANCE Black (DC–) Black w/ White Stripe (DC+) Operating Power: 9 to 15 VDC Power Consumption: 5W FIGURE 6 – TEU-F04 FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS Local/Remote DIP switch Data rate DIP switch See Installation Instructions, Step 1 See Installation Instr
PAGE 5
Data rate DIP switch See Installation Instructions, Step 1 Data rate DIP switch See Installation Instructions, Step 1 Data rate DIP switch See Installation Instructions, Step 1 CH16 ETHERNET CH15 ETHERNET CH14 ETHERNET CH13 ETHERNET CH12 ETHERNET CH11 ETHERNET CH10 ETHERNET CH9 ETHERNET CH8 ETHERNET CH7 ETHERNET CH6 ETHERNET CH5 ETHERNET CH4 ETHERNET CH3 ETHERNET CH2 ETHERNET CH1 ETHERNET CH1 EXT DISTANCE CH2 EXT DISTANCE CH3 EXT DISTANCE CH4 EXT DISTANCE CH5 EXT DISTANCE CH6 EXT
PAGE 6
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series CH1 EXT DISTANCE CH2 EXT DISTANCE CH3 EXT DISTANCE CH4 EXT DISTANCE CH5 EXT DISTANCE CH6 EXT DISTANCE CH7 EXT DISTANCE CH8 EXT DISTANCE CH9 EXT DISTANCE CH10 EXT DISTANCE CH11 EXT DISTANCE CH12 EXT DISTANCE CH13 EXT DISTANCE CH14 EXT DISTANCE CH15 EXT DISTANCE CH16 EXT DISTANCE FIGURE 8 – TEU-F16 MULTICHANNEL RACK UTP UNITS Black (DC–) Black w/ White Stripe (DC+) CH16 ETHERNET CH15 ETHERNET CH14 ETHERNET CH13 ETHERNET CH12 ETHERNET
PAGE 7
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series APPLICATION DIAGRAMS Ethernet Connection Note: Coaxial applications use TEC modules; UTP applications use TEU modules.
PAGE 8
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series INSTALLATION INSTRUCTIONS 1 - SET 10/100 SWITCH Locate the 10/100 data rate DIP switch on the unit. Set the data rate according to bandwidth required. NOTE: The data rate must be set the same on both the local and remote units. 2 - SET WIRE PAIR DIP SWITCHES (UTP MODELS ONLY, FOR COAX MODELS SKIP TO STEP 3) Locate the wire pair DIP switch on the unit. Set the pair according to number of twisted wire pairs used (1 or 4).
PAGE 9
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series APPLICATION NOTES 1 Mixed PoE and Non-PoE systems can be implemented. 2 All Non-PoE systems require local power. 3 PoE powered operation requires that a PoE Camera be connected, and that the camera power requirements are understood. 4 Multiple Channel units (TE(C,U)-F04, TE(C,U)-F16) require 9 to 15 VDC for proper operation. The TE(C,U)-F04 can be used in a SBP-C14 or SBP-C03.
PAGE 10
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series PRODUCT DIMENSIONS FIGURE A FIGURE B Dimensions are for a small size module Dimensions are for a standard module 0.8cm [0.31in] 0.4cm [0.16in] 4.19cm [1.65in] 0.62cm [0.24in] 13.2cm [5.2in] 11.9cm [4.7in] 6.37cm [2.50in] 8.38cm [3.3in] 0.63cm [0.25in] 2.7cm [1.06in] 7.5cm [2.9in] 15cm [5.9in] 2.75cm [1.1in] FIGURE C Dimensions are for a 19″ Rack Unit 1.9cm [0.75in] 44.45cm [17.50in] 48.26cm [19.0in] 1.9cm [0.75in] 15.44cm [6.08in] 4.
PAGE 11
INSTALLATION AND OPERATION MANUAL TE(C,U)-F Series INSTALLATION CONSIDERATIONS These units are supplied as Standalone/Rack mounted module. Units should be installed in dry locations protected from extremes of temperature and humidity. SBP-C14 / SBP-C03 CARD CAGE RACKS CAUTION: Although the units are hot-swappable and may be installed without turning power off to the rack, Hanwha recommends that the power supply be turned off and that the rack power supply is disconnected from any power source.