Spec Sheet

FIRST EDITION 12-2020 © 2020 Hanwha Techwin Co., Ltd. All rights reserved.
Benefits
TNM-3620TDY
Dual-Sensor Camera with
AI Face and Body Temperature detection
VIDEO THERMAL VISIBLE
1/2.8” 2MP CMOS
1945(H) x 1109(V)
-
-
Imaging Device
Eective Pixels
NETD
Pixel Size
Minimum Illumination
Uncooled micro bolometer
320(H) x 240(V)
< 60mK
12㎛
-
Color : 0.05 lux (F1.6, 1/30sec)
B/W : 0.005 lux (F1.6, 1/30sec)
Video Out
CVBS : 1.0 Vp-p / 75Ω composite, 720 x 480 for installation
USB : Micro USB Type B, 1280 x 720 for installation
LENS
Focal Length
Maximum Aperture Ratio
Angular Field of View
Minimum Object Distance
Focus Control
4.7mm xed focal
F1.0
H : 50.0˚, V : 36.4˚, D : 65.3˚
1m (3.28ft)
Fixed
4mm xed focal
F1.6
H : 87.6, V : 46.4°, D : 104.5°
-
Fixed
OPERATIONAL
Displayed up to 85 characters
- Auto (ICR)
- BLC, WDR, SSDR
-
ExtremeWDR (150dB)
- SSNRV
Camera
Title
Da
y & Night
Backlight Compensation
Wide Dynamic Range
Digital Noise Reduction
Digital Image Stabili
z
ation
M
otion D
et
ec
tion
Privacy Masking
Support (built-in gyro sensor)
8ea, 8point polygonal zones
32ea, polygonal zones / - Color: Grey/Green/Red/Blue/Black/
White / Mosaic
Gain Control - Low / Middle / High
White Balance - ATW / AWC / Manual / Indoor /
Outdoor
- SupportLDC
Electronic Shutter Speed - Minimum / Maximum /
Anti icker (2~1/12,000sec)
Video Rotation
Flip, Mirror, applied to both channels
Analytics
Normal mode : Motion detection, Enter/Exit, Tampering,
Virtual line, Audio detection, Temperature detection
EBT mode : Temperature detection, Blackbody error
Alarm I/O Input 1ea / Output 2ea
Alarm Triggers Analytics, Network disconnect, Alarm input
Alarm Events
File upload via FTP and e-mail / Notification via e-mail / SD/SDHC/
SDXC or NAS recording at event triggers / Alarm output / Handover
(Normal mode only) / Audio playback / Beep alarm (EBT mode only)
Audio In
Selectable (microphone
in/line in)
Supply v
oltage : 2.5VDC(4mA
), I
nput impedanc
e : 2K Ohm
Audio Out Line out, Maximum output level : 1Vrms
Color Palettes
Estimated Body Temperature
Mode
(Thermal Face detection) : Whitehot
Estimated Body Temperature Mode
(Visible Face detection) & Normal
mode : Whitehot, Blackhot,
Rainbow, Rainbow2, Sepia, Red, Iron,
Custom
-
RADIOMETRY
Temperature detection
range
Estimated Body Temperature
Mode : 30°~45°C (86°F~113°F)
Normal mode : -20°~+130°C
(-4˚F~+266˚F)
-
Temperature accuracy
Estimated Body Temperature
Mode : ±0.5°C (±0.9°F) /
±0.3°C (±0.54°F) with blackbody
Normal mode : -20°C~130°C
(-4˚F~266˚F) /±5˚C≤100˚C, ±20%
>100˚C (±9˚F≤212˚F, ±20%>212˚F
• Save time and unnecessary costs
associated with false alarms, thanks to
highly accurate detection and object
classication that uses Deep Learning
Articial Intelligence technology
• Help keep businesses, government
buildings and any public space safe
through ecient temperature monitoring
•
Fast detection of multi-point skin-
surface temperature of a person
• Multi-person detection
• No physical contact required
• Immediate alarms notify operators
•
Reduce false alarms by ignoring other
heat sources with AI-based face
detection, even while wearing a mask
•
Accuracy within ±0.5°C (±0.9°F), ±0.3°C (±0.54°F)
with blackbody
•
Verification and identification of subject with
visible camera
TNM-3620TDY
※Proper installation and use of a blackbody device (optional) is
recommended for best performance and accuracy. To ensure
accuracy, please follow FDA Guidelines. Make sure to have an
approved medical thermometer and trained staff for secondary
body temperature screening for a person suspected of having
an elevated temperature.
※Please note: Please contact Hanwha Techwin for information
on purchasing thermal cameras. Thermal cameras may not be
available for purchase by all customers or shipped to all
locations. Hanwha Techwin America restricts the purchase and
shipment to Ultimate Consignee and Purchaser locations in the
United States.
※This product is subject to US export licensing requirements.
Exports without an export license or other applicable
authorization to most countries is prohibited by law.