User Manual
Table Of Contents
- overview
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Connecting the Camera Directly to a PPPoE Modem
- Connecting the Camera to a Broadband Router with the PPPoE/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _7
●● OVERVIEW
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package.
(As for each sales country, accessories are not the same.)
Appearance Item Name Quantity Description
Camera
1
Quick Guide
(Optional)
1
Warranty card
(Optional)
1
Cable for the testing monitor
1
Used to test the camera connection to a portable
display device
Template
1
Product installation guide
Power Terminal Block
1
Plugged in the power plug
Audio/alarm Terminal Block
1
Plugged in the audio/alarm plug
CAUTION: Be w are of the
Rated Voltage and Po larit y
of the power connec tion.
Power Cable
1
Used to plug into the power port
L Wrench
1
Used to control the direction of the camera
Appearance Item Name Quantity Description
Audio/alarm cable
1
Used to connect with the audio and alarm port
Tapping Screw
4
Used for installation on the wall or ceiling
Sunshield
1
It protects the camera from the direct sunlight.
Sunshield Hold
1
It fixes the sunshield with the camera.
CONDUIT
BASE WALL MOUNT
1
The adapter that should be adjusted in order to hang
the camera on the wall
Cable bush
1
Used to connect the LAN cable with a diameter of
Ø7~8.5.