User Guide
72 2E. Calendar & Tools
3.
Touch to open
the
New Event window.
4. Touch the keyboard
field and slide out the
keyboard to create a
new title for the event
in Landscape mode.
䡲 Enter the event title.
(See “Entering Text”
on page 34.)
5. Select a start and end
time for the event by
touching the
corresponding
Start or
End fields.
6. Assign an hour and minute by either:
䡲 Touch either AM or PM.
䡲 Once you are done setting the times, touch Save.
7. Select an alert time for the event by touching the
Alert field and touching one of the following
options:
䡲 Select Off, On Time, 5 minutes before, 10 minutes
before, 15 minutes before, 30 minutes before,
1 hour before, 3 hours before, 5 hours before, or
1 day before.
8. Select a ringer type for the alarm by touching
Set Ringer and then selecting a sound file.
䡲 Touch to play a sound sample for a selected
ringer.
䡲 If a ringer has been previously selected, scroll
through the list of available ringer sounds and
touch a ringer name to re-assign it.
9. Select a reminder status for the event by touching
the
Reminder field and touching one of the
following options:
䡲 Select Off, Every 2 minutes or Every 15 minutes.
10. Touch Save to save the new event.
Tip: Touching and holding down on the arrows (up or down)
increases the speed at which the numbers scroll through
each reel.
Note: If you need to adjust the end date for an event, touch
the date field and select a new end date by touching a
day from the onscreen calendar.
M380_UG.book Page 72 Wednesday, May 11, 2011 2:36 PM