Specifications

YOUR NEW TV
English - 11
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 14 – 24.
ΠS-Video Input jack
Connect to S-Video output jack of an S-VHS VCR
or DVD player.
´ Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
• The Y Component video 1 and 2 input jacks
also function as the regular (composite)
video 2 and 3 input jacks.
ˇ Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
• The component audio 1 and 2 input jacks also
function as the audio 2 and 3 input jacks for
regular (composite) video.
¨ Audio-Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
ˆ Component Input jacks
(Y, P
B , P R , AUDIO-L/R)
Connect to the Component audio and video
outputs of a DVD or DTV set-top box.
480i/480p/720p/1080i Y, PB, and PR video signal
inputs are available.
Ø UPGRADE PORT
For service only
∏ HDMI (High Definition Multimedia Interface)
Input jack
Connect to the HDMI jack for device with HDMI
output.
” Digital Audio Output jack
(OPTICAL)
Connect to a Digital Audio component.
’ ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use “ANT 1 IN (Air)”
and “ANT 2 IN (Cable)” terminals to receive a
signal from VHF/UHF antennas or your cable
system.
AA68-03739A-01Eng 10/7/05 5:40 PM Page 11