User manual

110 111
Fine-Tuning Each Picture Mode (Advanced Settings)
Picture Advanced Settings
Try Now
Select Picture Advanced Settings to fine-tune how images are displayed on the TV screen for each
Picture Mode.
"
Advanced Settings is only available when the Picture Mode is set to Standard or Movie.
"
When the TV is connected to a computer via an HDMI-DVI cable, only White Balance and Gamma can be
adjusted.
Choose a Picture Mode and then adjust the settings.
●
Dynamic Contrast
Try Now
Automatically adjusts the screen contrast. Use this option to achieve the optimal contrast setting.
●
Black Tone
Try Now
Adjusts the black colour depth.
●
Flesh Tone
Try Now
Darkens or lightens skin tones.
●
RGB Only Mode
Try Now
Adjusts the red, green, and blue levels individually.
●
Colour Space
Try Now
Adjusts the range of colours that can be displayed on screen. Auto automatically adjusts the
colour space depending on the input signal. Native applies a range that is wider than the input
signal. Custom allows you to adjust the colour space manually.
●
White Balance
Try Now
Adjust the colour temperature of the picture to make white objects look white, and the overall
picture appear natural.
2 Point: Adjust each of the 3 colour's luminosity with the offset menu and the brightness with
the gain menu. To restore the default values, select Reset.
10 Point: Adjust the white balance by adjusting the brightness of each of the 10 sections of red,
green, and blue colours of the input signal. To choose a section, select a desired section in Level
field.
"
You can use the 10 Point function only when the Picture Mode is set to Movie. Some external devices
may not support this.
●
Gamma
Try Now
Adjusts the primary colour intensity.