User manual

150
There is a problem with the broadcast
The Problem Try this!
The TV is not receiving
all channels.
If your TV is not connected to a cable box:
●
Confirm that the coaxial cable is securely connected to the TV.
●
If you are using an antenna, verify it is positioned correctly and the all the
connections are secure.
●
Run Setup (System Setup) or Auto Tuning (Broadcasting Auto Tuning).
There are no captions
with digital channels.
Go to Subtitle (System Accessibility Subtitle) and change the Subtitle
Mode.
Some channels may not have caption data.
The picture is distorted.
The compression of the video content may cause picture distortions. This is
especially true with fast moving pictures from sports programmes and action
movies.
A weak signal can cause picture distortions. This is not a problem with the TV.
The computer won't connect
The Problem Try this!
The "Mode Not
Supported" message
appears.
Set your PC’s output resolution so it matches a resolution supported by the TV.
The video is OK but
there is no audio.
If you are using an HDMI connection, check the audio output setting on your PC.
If you are using a DVI to HDMI cable, a separate audio cable is required.
I can't connect to the Internet
The Problem Try this!
The wireless network
connection failed.
Make sure the TV is connected to a wireless IP router.
The software update
over the Internet has
failed.
Check the network connection status.
If the TV is not connected to a network, connect to a network.
The upgrade stops if you already have the latest software version.