E-MANUAL imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model______________ Serial No.
Contents • Using the Smart Hub 170 55 • Connecting a USB Device 171 • Setting the Time 86 • Connecting to the PC through network 172 10 • Locking Programme 92 • Using Favourite Channels 14 • Economical Solutions 94 • Recorded TV • Videos 180 190 • Memorising Channels 17 • Other Features 96 • Music 197 • Other Features 22 • Picture In Picture (PIP) 101 • Photos 201 • Support Menu 104 • Media Contents - Additional Function 202 Channel Menu Preference Features • Using the I
Channel Menu ❑❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. ●● Scroll l, r to view information for a desired programme while watching the current channel. ●● Scroll u, d to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button.
❑❑ Using the Channel Menu Press the SMART HUB button to select the menu you want to use. Each screen will be displayed. Search Your Video Samsung Apps Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries. For some of the countries listed, local language characters might not be displayed properly. Favourites Channel Photos Music Guide Record TV Schedule Man...
Using Channel View a Red (Sche. Mgr): Displays the Schedule Manager. Guide TELA QUENTE (HD) 10:05 pm - 12:10 pm 10 b Green (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. ◀ { Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours. Fri, 1 Jan 2:10 am DTV Air 05.1 Globo HD DESVENTURAS EM SERIE (HD) Channel View - All Channels Today 10:00pm 10:30pm 04.1 Globo HD American Chopper 05.1 DiscoveryH&L Programmes resume at 06:00 05.
■■ Schedule Manager You can view, modify or delete a channel you have reserved to watch. Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function. 1. Press the ENTERE button to add programme to schedule manually. The Timer Viewing screen appears. ◀ 2. Press the l or r button to select the Timer Viewing. 3. Press the l / r / u / d buttons to set the Channel, Repeat or Start Time.
●● Channel: Select the desired channel. ●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If you select Manual, you can set the day you want. NN The c mark indicates the date is selected. ●● Date: You can set the desired date. NN It is available when you select Once in Repeat. ●● Start Time: You can set the start time you want.
NN Only memorised channels can be reserved. NN On the Information screen, you can change or cancel a reserved information. Select a reserved programme, and then press the ENTERE button to open the Detailed Information screen. ●● Cancel Schedules: Cancel a show you have reserved to watch. ●● Edit: Change a show you have reserved to watch. ●● Return: Return to the previous screen.
Using the Timer Recording (digital channels only) for LED 6400 series and above Allows you to make a reservation to record a programme scheduled for broadcast. Set the current time first to use this function. OO The � button also controls recording. 1. Press the ENTERE button to select Schedule. The Schedule Manager screen will be displayed. 2. Press the ENTERE button to add manual booking. A pop up screen will appear. ◀ 3. Press the l or r button to select the Timer Recording.
■■ Channel List You can view all the channel searched. Channel List All Channel NN When you press the CH LIST 6 Air 6-1 TV #6 button on the remote control, Channel List screen will be displayed at once. 7 Air 8 Air 9 Air No Information 9-2 NN If you want to view favourite TV #10 9-3 TV #11 9 Air 10-1 TV #12 10-2 TV #13 10 Air 11 Air k Page E Watch { programme View L Ch.Mode ◀ channels you added, press the CH ●● LIST button and use the l or r (Ch.
NN Using the operation buttons with the Channel List. ●● k (Page): Move to next or previous page. ●● E (Watch / Information): Watches the channel you select. / Displays details of the selected programme. ●● { Yellow (Programme View / Channel View): Displays the programme when digital channel is selected. Returns to the channel view. ●● l r (Ch. Mode): Move to the type of channels you want to display on the ◀ Channel List screen.
❑❑ Using the Channel ■■ Channel OO SMART HUB → Channel → ENTERE Delete added channels or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the All, Analogue, TV, Radio and Favourites 1-5 screen. Change the antenna, or channel settings using the menus in the top right corner of the screen. ◀ ●● ●● Sort: Sorting by Channel Number or Channel Name. Edit Mode: Deletes channels assigned to Favourites.
Using the TOOLS button with the Channel ●● Upcoming Programme (digital channels only): View details on the programme being aired on a selected digital channel. ●● Edit Favourites: Set channels you watch frequently as favourites. 1. Select the Edit Favourites, then press the ENTERE button. 2. Press the ENTERE button to select Favourites 1-5, then press the OK button. ◀ NN One favourite channel can be added in several of favourite channels among Favourites 1-5.
●● Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed. NN NOTE ●● This function is available only when the Channel Lock is set to On. ●● The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. ●● Edit Channel Name (analogue channels only): Assign your own channel name. ◀ NN This function may not be supported depending on the region.
●● Delete: Delete a channel to display the channels you want. NN A gray-coloured channel indicates the channel has been deleted. Channel Status Display Icons Icon ◀ Operations a An analogue channel. c A channel selected. F A channel set as a Favourite 1-5. \ A locked channel.
❑❑ Using Favourite Channels ■■ Favourites Shows all favourite channels. View all of your favourite channels. If you want to change the favourite group among Favourites 1-5, move the cursor to group name. And then press the ENTERE button to change the group you want. NN The “F” symbol will be displayed and the channel will be set as a favourite.
Change the view mode, antenna, sorting type or edit item using the menus in the top right corner of the screen. View Mode: You can change a view mode between Text mode or Thumbnail mode. Sorting: Sorts by title or category (channel, input source, etc.). Edit Mode: Delete item assigned to Favourites.
How to assign a channel to favourite (in Channel) 1. On the Channel screen, Select appear. Edit Mode. The Edit Mode screen will 2. Press the l / r / u / d button to select a channel you want to add and press the ENTERE button. NN If you want to select all channels, press the l / r / u / d buttons to select Select All. ◀ NN The c mark appears to the left of the selected files. 3. When done, press the d button to select Edit Favourites. 4.
❑❑ Memorising Channels OO MENUm → Channel → ENTERE ■■ Country NN The PIN input screen appears. Enter your 4 digit PIN number. NN Select your country so that the TV can correctly auto-tune the broadcasting channels.
■■ Auto Tuning Scans for a channel automatically and stores in the TV. NN Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears. –– Digital & Analogue / Digital / Analogue: Select the channel source to memorise.
■■ Manual Tuning Scans for a channel manually and stores in the TV. NN If a channel is locked using the Channel Lock function, the PIN input window appears. NN This function may not be supported depending on the region. ●● Digital Channel Tuning: Scans for a digital channel. 1. Press the l / r button to select New. ◀ 2. Set the Channel, Frequency and Bandwidth. NN The Bandwidth function is supported in New zealand and Singapore only. 3. Press the d button to select Search.
●● Analogue Channel Tuning: Scans for a analogue channel. 1. Press the u / d / l / r button to select New. 2. Set the Colour System, Sound System, Channel and Search. 3. Press the d button to select Store. When scanning has finished, a channel is updated in the channel list. NN If you want to edit a values of analogue channel, select an analogue ◀ channel, and then select Edit. You can edit a values of selected analogue channel.
NN Channel mode ●● P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode. ●● C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
❑❑ Other Features OO MENUm → Channel → ENTERE ■■ Transfer Channel List NN This function may not be supported depending on the language. The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function. ◀ ●● Import from USB: Import channel list from USB. ●● Export to USB: Export channel list to USB. this function is available when USB is connected.
■■ Fine Tune (analogue channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. NN Settings are applied to the channel you’re currently watching. ◀ NN Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.
Basic Features ❑❑ Changing the Preset Picture Mode OO MENUm → Picture → Picture Mode → ENTERE ■■ Picture Mode t Select your preferred picture type. NN When connecting a PC, you can only make changes to the Standard and Entertain. ◀ ●● Dynamic: Suitable for a bright room. ●● Standard: Suitable for a normal environment. ●● Natural: Suitable for reducing eye strain. ●● Movie: Suitable for watching movies in a dark room. ●● Entertain: Suitable for watching movies and games.
❑❑ Adjusting Picture Settings OO MENUm → Picture → ENTERE ■■ Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options for picture quality control. NN In analogue TV, AV modes of the PAL system, the Tint (G/R) function is not available. ◀ NN When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and Sharpness. NN Settings can be adjusted and stored for each external device connected to the TV.
❑❑ Changing the Picture Size OO MENUm → Picture → Screen Adjustment → ENTERE ■■ Screen Adjustment ●● Picture Size t: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. –– Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. ◀ –– 16:9: Adjusts the picture size to 16:9 for DVDs or wide broadcasting. –– Wide Zoom: Magnifies the picture size more than 4:3.
–– 4:3: The default setting for a movie or normal broadcasting. NN Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty. –– Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. –– Smart View 1: Reduces the 16:9 picture by 50%. ◀ –– Smart View 2: Reduces the 16:9 picture by 25%.
NN NOTE ●● Depending on the input source, the picture size options may vary. ●● The available items may differ depending on the selected mode. ●● In PC mode, only 16:9 and 4:3 modes can be adjusted. ●● Settings can be adjusted and stored for each external device connected to an input on the TV. ●● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at ◀ the top, bottom, left and right as in the overscan function.
●● 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3) (depending on the country): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. NN Not available in PC, Component or HDMI mode.
❑❑ Changing the Picture Options ■■ Advanced Settings OO MENUm → Picture → Advanced Settings → ENTERE (available in Standard / Movie mode) You can adjust the detailed setting for the screen including colour and contrast. ◀ NN When connecting a PC, you can only make changes to Gamma and White Balance .
●● Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ●● Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ●● Shadow Detail (-2~+2): Increase the brightness of dark images. ●● Gamma: Adjust the primary colour intensity. ●● Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern ◀ function, the picture can be calibrated without a generator or filter.
●● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. ●● Colour Space (Auto / Native / Custom): Adjust the range of colours available to create the image. NN To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom. ●● White Balance: Adjust the colour temperature for a more natural picture. ◀ R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
●● 10p White Balance (Off / On): Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. NN Available when the picture mode is set to Movie and when the external input is set to all input. NN Some external devices may not support this function. Interval: Select interval to adjust. Red: Adjust the red level. ◀ Green: Adjust the green level. ▶ Blue: Adjust the blu e level. Reset: Resets the 10p White Balance to its default settings.
●● Flesh Tone: Emphasize pink “Flesh Tone.” ●● Edge Enhancement (Off / On): Emphasize object boundaries. ●● Motion Lighting (Off / On) : Reduces power consumption by reducing screen brightness when the picture on the screen is motionless. NN Motion Lighting is available in Standard / Movie mode. NN When changing a setting value of Backlight, Brightness or Contrast, Motion Lightning will be set to Off. ◀ NN 3D is not supported.
■■ Picture Options OO MENUm → Picture → Picture Options → ENTERE NN When connecting a PC, you can only make changes to the Colour Tone. Colour Tone ●● Colour Tone (Cool / Standard / Warm1 / Warm2) NN Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. ◀ Picture Option NN Settings can be adjusted and stored for each external device connected to an input on the TV.
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter. NN Only available for analogue channels. ●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise ◀ to provide improved picture quality.
●● Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality. NN Available in AV, COMPONENT (480i / 1080i) and HDMI (1080i). ●● Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Removes drag from fast scenes with a lot of movement to provide a clearer picture.
Blur Reduction: Adjusts the blur reduction level from video sources. Judder Reduction: Adjusts the judder reduction level from video sources when playing films. Reset: Reset the custom settings. ■■ Reset Picture (Yes / No) Resets your current picture mode to its default settings.
❑❑ Setting up the TV with Your PC Set the input source to PC. ■■ Auto Adjustment t OO MENUm → Picture → Auto Adjustment → ENTERE Adjust frequency values/positions and fine tune the settings automatically. NN Not available when connecting with an HDMI to DVI cable.
■■ PC Screen Adjustment OO MENUm → Picture → Screen Adjustment → PC Screen Adjustment → ENTERE ●● Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen. ◀ ●● Position: Adjusts the PC screen position with direction button (u / d / l / r).
Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on “Control Panel” on the Windows start menu. ◀ 2. Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear. 3.
❑❑ Changing the Preset Sound Mode OO MENUm → Sound → Sound Mode → ENTERE ■■ Sound Mode t ●● Standard: Selects the normal sound mode. ●● Music: Emphasizes music over voices. ●● Movie: Provides the best sound for movies. ◀ ●● Clear Voice: Emphasizes voices over other sounds. ●● Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
❑❑ Adjusting Sound Settings OO MENUm → Sound → ENTERE ■■ Sound Effect NN If Speaker Select is set to External Speaker, Sound Effect is disabled. ●● SRS TruSurround HD (Off / On) t (standard sound mode only) ◀ This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.
●● SRS TruDialog (Off / On) (standard sound mode only) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. ●● SRS CS Headphone: You can hear virtual 5.1ch surround sound over the headphones.
●● Equalizer Adjusts the sound mode (standard sound mode only). Balance L/R: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. Reset: Resets the equalizer to its default settings.
■■ 3D Audio (Off / Low / Medium / High) 3D audio technology provides the immersive sound corresponding to the pop-up effect of 3D video by audio depth control in perspective. NN Available in only when watching 3D image.
■■ Broadcast Audio Options ●● Audio Language (digital channels only) Change the default value for audio languages. NN The available language may differ depending on the broadcast. ●● Audio Format ◀ (digital channels only) When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. NN Audio Format option may differ depending on the broadcast.
●● Audio Description (not available in all locations) (digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. NN Audio Description (Off / On): Turn the audio description function on or off. NN Volume: Adjust the audio description volume.
■■ Additional Settings (digital channels only) ●● DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. NN According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. ◀ NN To increase or decrease the volume, adjust between the range 0 and -10 respectively.
●● SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. ●● Audio Format: You can select the Digital Audio output (SPDIF) format. NN The available Digital Audio output (SPDIF) format may differ depending on the input source.
●● Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). NN Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. ●● Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. ◀ ●● RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
■■ Speaker Settings ●● Speaker Select (External Speaker / TV Speaker) A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. NN When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. ◀ NN When Speaker Select is set to External Speaker. ●● TV Speaker: Off, External Speaker: On NN When Speaker Select is set to TV Speaker.
●● Auto Volume (Off / Normal / Night) To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. NN To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of the connected source device may not be applied if Auto Volume is set to Normal or Night.
❑❑ Selecting the Sound Mode t When you set to Dual f-g, the current sound mode is displayed on the screen. NICAM Stereo Mono MONO Stereo STEREO ↔ MONO Dual DUAL f ↔ DUAL g Mono MONO Stereo MONO ↔ STEREO Dual MONO → DUAL f DUAL g ↑ ◀ DUAL f-g ← A2 Stereo Audio Type Default Automatic change DUAL f Automatic change DUAL f NN If the stereo signal is weak and an automatic switching, occurs, then switch to the mono. NN Only activated in stereo sound signal.
Preference Features ❑❑ Setting the Network ■■ Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways: You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. See the diagram below.
●● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below.
●● Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
●● If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. ◀ Some networks require a Static IP address.
■■ Network Setting OO MENUm → Network → Network Settings → ENTERE Set the network connection to use various Internet services such as SMART HUB, AllShare and perform software upgrade. ■■ Network Status OO MENUm → Network → Network Status → ENTERE ◀ You can check the current network and Internet status. ■■ AllShare Settings OO MENUm → Network → AllShare Settings → ENTERE Selects whether to use media functions on the network.
■■ Network Setup (Auto) Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1.Go to Network Setting screen. To enter it, follow the directions of Network Setting. ◀ 2. Select the Wired. Network Settings 2/6 Select a network connection type. 3. The network test screen appears, and network setting is done.
NN If it fails to set automatically, check the connection of LAN port. Network Settings 2/6 Wiress network and Internet connection completed. MAC Address NN If you cannot find network connection values or if you want to set connection manually, set it to Manual. Refer to following “How to set up manually”. ◀ IP Address Subnet Mask SEC_LinkShare 00:12:fb:2b:56:4d 192.168.11.4 255.255.255.0 Gareway 192.168.11.1 DNS Server 192.168.11.1 Retry IP Settings Internet is connected successfully.
■■ Network Setting (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. ◀ 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button.
How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network test screen. IP Settings IP Mode 3. Set IP Mode to Manual. 4. Press the d button on your remote to go to the IP Address. ◀ 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values.
■■ Connecting to a Wireless Network for LED 6400 series and under To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN-sold separately) , which you connect to your TV’s back or side panel USB port. See the illustration below.
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a IEEE 802.11b/g connection, the video may not play smoothly. NN NOTE ●● You must use the “Samsung Wireless LAN adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network.
●● Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. ●● If you apply a security system other than the systems listed below, it will not work with the TV. ●● If Pure High-throughput (Greenfield) 802.
●● If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN adapter.” ●● Ensure the TV is turned on before you connect the Samsung Wireless LAN adapter. ●● Connection Methods: You can setup the wireless network connection on five ways.
■■ Connecting to a Wireless Network for LED 6600 Series and above You can connect your TV to your LAN through a standard wireless router or modem.
Samsung Wireless LAN Adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a IEEE 802.11b/g connection, the video may not play smoothly. NN NOTE ●● To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
●● If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new WiFi certification specifications. ●● If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
●● Connection Methods: You can setup the wireless network connection on five ways.
■■ Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network.
3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. 4. In the list of networks, press the u or d button to select a network, and then press the ENTERE button. NN If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security key to establish the connection. ◀ 5. If the Security screen pop-up appears, go to step 6.
6. If the wireless router has security, enter the Security key(Security or PIN), then select Next. NN When you enter the Security key(Security or PIN), use u / d / l / r buttons on your remote to select number/ characters. Network Settings Enter Acceress Point Name(SSID) to connect. a b c d e f 1 2 3 g h i j k l 4 5 6 m n o p q r 7 8 9 s t u v w x y z 0 a/A Delete Previous Next Cancel Space ●● The displayed image may differ depending on the model.
■■ Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. ◀ 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button.
How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network test screen. ◀ 3. Set IP Mode to Manual. IP Settings IP Mode Manual IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway 0.0.0.0 DNS Mode Manual DNS Server 0.0.0.0 OK 4. Press the d button on your remote to go to the first entry field.
■■ Network Setup (WPS(PBC)) How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps: 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. 2. Select the WPS(PBC). ◀ Network Settings 3. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. 4. The network test screen appears, and network setting is done.
■■ Network Setting (One Foot Connection) The One Foot Connection make you easy to connect samsung TV and samsung wireless router by placing samsung wireless router within 1 foot(25cm) from samsung TV. If your wireless router does not support One Foot Connection, you must connect using one of the other methods. NN You can check for equipment that supports One Foot Connection on. www. samsung.
How to set up using One Foot Connection Turn on the power of wireless router and TV. 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. 2. Select the One Foot Connection. ◀ Network Settings 2/6 Select a network connection type. Wired Wireless(general) WPS(PBC) 3. Place the wireless router in parallel with the Samsung Wireless LAN adapter giving a gap no larger than 25cm.
NN If One Foot Connection does not connect your TV to your Router, a pop-up window appears on the screen notifying you of the failure. If you want to try using One Foot Connection again, reset the wireless router, disconnect the Samsung Wireless LAN adapter and then try again from Step 1. You can also choose one of the other connection setup methods. 4. The network connection screen appears, and network setting is done. 5. Place the AP in a desired location.
■■ Network Settings (Plug & Access) Plug & Access function make you easy to connect samsung TV and samsung wireless router by using USB memory stick. If your wireless router does not support Plug & Access, you must connect using one of the other methods. NN You can check for equipment that supports Plug&Access on www.samsung. com.
How to set up using Plug & Access function Turn on the power of wireless router and TV. 1. Insert USB memory stick into our Samsung wireless router and checking wireless router’s LED status (Blinking → On). 2. Then take USB memory out and insert it into Samsung TV. 3. Wait until the connection is automatically established. NN If Plug & Access does not connect your TV to your wireless router a pop- ◀ up window appears on the screen notifying you of the failure.
4. The network connection screen appears, and network setting is done. 5. Place the wireless router in a desired location. NN If the wireless router settings change or you install a new wireless router you must perform the Plug & Access procedure again, beginning from Step 1.
Priority QOS Samsung wireless Router is optimized HD AV streaming for Samsung DTV This is our product’s distinctive function. Samsung wireless Router can be connected with many devices, such as laptop, mobile phone, BD player etc. ◀ In case of connecting Samsung TV to Samsung wireless Router while other devices are connected, Samsung wireless Router will give Samsung TV a priority connection than other devices. This function ensures the best streaming contents and throughput speed.
If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
❑❑ Setting the Time OO MENUm → System → Time → ENTERE ■■ Time ●● Clock: Setting the clock is for using various timer features of the TV. OO The current time will appear every time you press the INFO button. NN If you disconnect the power cord, you have to set the clock again. ◀ –– Clock Mode (Auto / Manual) Auto: Set the current time automatically using the time from a digital channel. NN The antenna must be connected in order to set the time automatically. Manual: Set the current time manually.
–– Clock Set: Set the Date and Time. NN Available only when Clock Mode is set to Manual. NN You can set the Date and Time directly by pressing the number buttons on the remote control. –– Time Zone (Auto / Manual) (depending on the country): Set the time zone to GMT. NN Available only when the Clock Mode is set to Auto. ◀ ▶ Using the Sleep Timer OO MENUm → System → Time → ENTERE ●● Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
Setting the On / Off Timer ● On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock first. ◀ Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. N The c mark indicates the day is selected.
Time: Set the hour and minute. Volume: Set the desired volume level. Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select ATV or DTV. Channel (when the Source is set to TV): Select the desired channel.
NN NOTE ●● If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. ●● When there is only one photo file in the USB, the Slide Show will not play. ●● If a folder name is too long, the folder cannot be selected. ●● Each USB you use is assigned its own folder. When using more than one ◀ of the same type of USB, make sure the folders assigned to each USB have different names.
● Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. ◀ N The c mark indicates the day is selected. Time: Set the hour and minute.
❑❑ Locking Programme OO MENUm → System → Security → ENTERE ■■ Security The PIN input screen appears before the setup screen. ●● Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. ◀ ●● Channel Lock (Off / On): Lock channels in channel list, to prevent unauthorized users, such as children, from watching unsuitable programme. NN Available only when the Source is set to TV.
●● Programme Rating Lock: Prevent unauthorized users, such as children, from watching unsuitable Programme with a userdefined 4-digit PIN code. If selected channel is locked,the “\” symbol will be displayed. ●● Change PIN: Change your personal ID number required to set up the TV. NN If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
❑❑ Economical Solutions ■■ Eco Solution OO MENUm → System → Eco Solution → ENTERE ●● Energy Saving (Off / Low / Medium / High / Picture Off) t: This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. ◀ ●● Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.
●● No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. NN Disabled when the PC is in power saving mode. ●● Auto Power Off (Off / On): The TV will be automatically turned off after 4 hours of being left idle to prevent overheating.
❑❑ Other Features OO MENUm → System → ENTERE ■■ Language ●● Teletext Language: Set a desired language for teletext. NN English is the default in cases where the selected language is unavailable in the broadcast. ◀ ●● Preference (Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select a language, which will be the default language when a channel is selected.
●● Subtitle Language: Sets the subtitle language. NN If the programme you are watching does not support the Hearing Impaired function, Preferred automatically activates even if the Hearing Impaired mode is selected. NN English is the default in cases where the selected language is unavailable in the broadcast. ■■ Digital Text (Disable / Enable) ◀ ▶ (New Zealand only) If the programme broadcasts with digital text, this feature is enabled.
■■ General ●● Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. NN NOTE ●● Precautions and limitations for game mode –– To disconnect the game console and connect another external device, ◀ set Game Mode to Off in the setup menu. –– If you display the TV menu in Game Mode, the screen shakes slightly. ●● Game Mode is not available when the input source is set to TV or PC.
●● BD Wise (Off / On): Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. NN Available when connecting Samsung products that support BD Wise through a HDMI cable. ●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on. ◀ ●● TV Name: Sets the TV name so you can find it easily on a mobile device.
■■ Anynet+(HDMI-CEC) For details on set up options, refer to the “Anynet+(HDMI-CEC)” instructions. ■■ DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using Media contents, the registration is completed. NN For more information on DivX® VOD, visit “http://vod.divx.com”.
❑❑ Picture In Picture (PIP) ■■ PIP t You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.
NN NOTE ●● When Double (à, Œ) mode has been set in PIP, the Picture Size cannot be set. ●● For PIP sound, refer to the Sound Select instructions. ●● If you turn the TV off while watching in PIP mode, the PIP window will disappear. ●● You may notice that the picture in the PIP window becomes slightly ◀ unnatural when you use the main screen to view a game or karaoke. ●● While Child Lock and SMART HUB are in operation the PIP function cannot be used. ●● The PIP function is not available in 3D mode.
●● PIP settings Main picture Sub picture Component, HDMI, PC TV ●● PIP (Off / On): Activate or deactivate the PIP function. ●● Channel: Select the channel for the sub-screen. ●● Size (õ / ã / à / Œ): Select a size for the sub-picture. ◀ ●● Position (ã / – / — / œ): Select a position for the sub-picture. NN In Double (Œ / à) mode, Position cannot be selected. ●● Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode.
❑❑ Support Menu OO MENUm → Support → ENTERE ■■ e-Manual You can read the introduction and instructions about the TV features stored in your TV. NN For the detailed information about e-Manual Screen, refer to “How to view the e-Manual” in User Manual. ◀ ▶ ■■ Self Diagnosis NN Self Diagnosis might take few seconds, this is part of the normal operation of the TV. ●● Picture Test (Yes / No): Use to check for picture problems.
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. NN If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. NN The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
●● Troubleshooting: If the TV seems to have a problem, refer to this description. NN If none of these troubleshooting tips apply, contact the Samsung customer service centre. ■■ Software Upgrade Software Upgrade can be performed via a broadcasting signal or by network connection or downloading the latest firmware from “www.samsung.com,” to a USB memory device.
Installing the Latest Version ●● By USB: Insert a USB drive containing the ◀ TV Rear Panel firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are USB complete. The TV will be turned off and on ●● The displayed image may differ depending on the automatically after completing the firmware model. upgrade.
●● By Online: Upgrade the software using the Internet. NN First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Connection” instructions. NN If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade. ●● By Channel: Upgrade the software using the broadcasting signal. ◀ NN This function may not be supported depending on the language.
●● Alternative Software (backup): Displays the software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated. ●● Standby Mode Upgrade (Off /1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 / 14:00): A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product.
Advanced Features ❑❑ Using the 3D function OO MENUm → Picture → 3D → ENTERE ■■ 3D ◀ This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG-3100GB, SSG-S3300GR, SSG-3300CR, SSG-3700CR) to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.
❑❑ Viewing TV using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. [[ WARNING ●● Some viewers may experience discomfort while viewing 3D TV such as ◀ dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest. ●● Watching 3D images for an extended period of time may cause eye strain.
●● A responsible adult should frequently check on Children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. ●● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) ●● Do not use the 3D function or 3D Active Glasses while walking or moving around.
●● 3D Mode: Select the 3D input format. NN If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3D viewing experience. NN When watching 3D images, turn on 3D Active Glasses. 3D Mode 3D ◀ Operation Off Turns the 3D function off. 2D → 3D Changes a 2D image to 3D. for LED 6400 series and above Side by Side Displays two images next to each other. Top & Bottom Displays one image above another.
●● 3D Perspective (-5 ~ +5) for LED 6400 series and above : Adjust overall 3D perspective of on-screen image. ●● Depth (1~10) for LED 6400 series and above : Adjust overall depth. ●● L/R Change (L/R Image / R/L Image): Swap the left and right pictures. ●● 3D → 2D (Off / On): Displays the image for the left eye only. NN This function is deactivated when 3D Mode set to “2D → 3D” or Off. ●● 3D Optimisation: The overall adjustment of 3D effect.
NN Support resolution (16:9 only) ◀ Resolution Frequency (Hz) 1280 x 720p 50 / 60 Hz 1920 x 1080i 50 / 60 Hz 1920 x 1080p 24 / 30 / 50 / 60 Hz Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input. An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.
How to watch the 3D image ●● Method 1 NN Some 3D modes may not be available depending on the format of the image source. NN To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. ◀ 1. Press the MENU button on your remote, use the u or d button to select Picture, and then press the ENTERE button. 2. Use the u or d button to select 3D, and then press the ENTERE button.
3. Use the u or d button to select 3D Mode, and then press the ENTERE button. 4. Using the l or r buttons on your remote control, select the 3D Mode of the image you want to view. ◀ 3D mode Cancel ●● The displayed image may differ depending on the model.
●● Method 2 1. Press the 3D button on your remote. and then you can view the 3D image. 2. If you want to change 3D options (such as 3D Perspective), press the MENU button on your remote, and then select Picture. 3. Go to Step 3 in the “Method 1”, and follow the directions from that point on. NN To exit the 3D mode, press the 3D button on your remote again.
Supported formats and operating specifications for Standard HDMI 3D NN The 3D formats indicated below are recommended by the HDMI association and must be supported. ◀ Source signal format Standard HDMI 1.
Before using 3D function... NN Recommended 3D operating distance Recommended pairing distance 50cm 2~6m Recommended viewing distance ◀ Recommended pairing distance 2~6m (6 to 19.5 ft) 2~6m (6 to 19.
NN NOTE ●● 3D Mode is set to Off automatically when accessing Smart Hub or e-Manual functions. ●● 3D Mode is set to memorised configuration value automatically, when changing the input source. ●● Some Picture functions are disabled in 3D mode. ●● PIP is not supported in 3D mode. ◀ ●● 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be supported.
●● When the TV is initially powered on, may take some time until the 3D display is optimized. ●● The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses. ●● Be sure to stay within the viewing angle and optimum TV viewing distance ◀ when watching 3D pictures. Otherwise, you may not be able to enjoy proper 3D effects.
❑❑ Getting Started with Smart Hub NN Some functions may not be supported depending on the country. Features Search All Social TV Easily search and access content from diverse sources (e.g. applications, Your Video, AllShare). Share your TV viewing experience with your friends via social networking service (SNS). ◀ ▶ Your Video Web Browser Enjoy your movie wathing with a customized video on demand (VOD) recommendation service. Access the web and watch TV at the same time.
Smart Hub brings useful and entertaining contents and services directly from the web to your TV. The Gateway to all content integrated in one place ◀ ●● It’s all integrated to guide you to easier and diverse entertainment choices. Search Your Video Samsung Apps Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries. For some of the countries listed, local language characters might not be displayed properly.
Screen Display You can search for various types of content that can be used on your TV. Enter a keyword to search for media, various applications, or online information that you can use on the TV. Exit: Exits the SMART HUB. Search Your Movie Samsung Apps Application service: You can experience various service provided by samsung Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries.
NN NOTE ●● Configure the network setting before using Smart Hub. For more information, refer to “Network Settings”. ●● Unsupported fonts within the provider’s content will not display normally. ●● Slow responses and/or interruptions may occur, depending on your network conditions. ●● Depending on the region, English may be the only language supported for ◀ application services. ●● This feature is not available in some locations.
●● If you experience a problem using an application, please contact the content provider. ●● According to circumstances of the contents provider, an application’s updates or t he application itself may be discontinued. ●● Depending on your country’s regulations, some applications may have limited service or not be supported.
Account Login For an application with multiple accounts, select ^ to access the different accounts. NN For a more enjoyable application experience, register and log in to your account. NN For instructions on creating an account, refer to “How to create an Smart Hub ID”. Login Smart Hub ID Press [ENTER] Password Press [ENTER] Remember Smart Hub Account Password Login Cancel Create Account Find Password ●● The displayed image may differ depending on the model.
1. Press the Red button in the Smart Hub home page. 2. Select ^ by pressing the u / d / l / r button. The account list appears. NN If you want to create an account, select Create Account then the create account OSD window will appear. 3. Select the desired Smart Hub ID, and the press the ENTERE button. 4. After selecting Smart Hub ID, enter the Password using the remote control. NN When login succeeds, Smart Hub ID will be displayed on the screen.
How to create a Smart Hub ID Before creating a Smart Hub ID, you should download the application first on the Samsung Apps. 1. Press the Red button. The Login screen appears. 2. Select Create Account. The Create Account screen will appear. 3. Press the ENTERE button to enter a new Smart Hub ID. The Keypad screen will appear. ◀ 4. Using the keypad screen, enter a Smart Hub ID. NN A Smart Hub ID must be created in “sample@sample.com” form.
Using the Keypad Pressing the TTX/MIX button on the remote while you are using the Screen Keypad enables you to change the text fields to lower case, capitalized case, upper case, numbers and icons. Using the Green b button on the remote control to change the input mode. (T9/ ABC) You can change the language by using the TOOLS button. ◀ You can use this Screen Keypad in a several Smart Hub applications. Method 1: Using keypad of ABC type. 4-1. For example, suppose that you want to input “105Chang”. 4-2.
4-4. Press the TTX/MIX button on the remote 4 times to change the input mode from numbers to upper case. 4-5. Press the 2 button on the remote 3 times to input C. 4-6. Press the TTX/MIX button on the remote 3 times to change the input mode from upper case to lower case. 4-7. Press buttons on the remote to input the rest of “Chang”. When done, press the ENTERE button. ◀ Method 2: Using the Keypad of T9 type. 4-1. For example, suppose that you want to input “105Chang” 4-2.
4-4. Press the TTX/MIX button on the remote 4 times to change the input mode from numbers to upper case. 4-5. Press numbers in sequence: 2, 4, 2, 6, 4. A window will appear displaying a list of words that can be entered using the selected numbers. Select “Chang” from the list. NN If “Chang” cannot be found in the list, select + to create your own dictionary.
5. Using the remote control, enter the Password. ●● Password must be 6~12 words. ●● You can delete the entered character using the PRE-CH button. ●● Using the � (REW) or µ (FF) button, you can select icon you want to enter in icon keypad screen. ◀ 6. Account created. You can use the services provided by all users of your Samsung TV with a single login by linking the users’ account to the TV ID. If you want to register a service site ID, select Connect Service. Service Site list will appear on the screen.
7. Select Service of the Service Site you want, then press the ENTERE button. 8. Using number buttons, enter your application site ID and password. When done, select OK. 9. Registered successfully. If you add another service site, select Yes. then press the ENTERE button, go to step 7. ◀ 10. When completed, select OK. Then press the ENTERE button. Settings Account Management Service Manager Reset Properties Close ● The displayed image may differ depending on the model.
❑ Setting up Smart Hub ■ Settings Configure Smart Hub settings from this screen. Press } button to enter Settings. Account Management Service Manager ● Account Management ◀ Settings Reset Register Service Account: Register login information for service sites. Change Password: Change account password. Properties Close ● The displayed image may differ depending on the model. Remove from TV Account List: Delete an account from the list of accounts.
●● Service Manager Ticker Autorun: You can set Ticker Autorun to come on when powering on the TV. NN The Ticker application provides useful News, Weather, and Stock Market information. The Ticker application on Smart Hub must be downloaded to use this feature. NN Depending on your country, Ticker application may have a different service or ◀ not be supported.
●● Reset: Resets Smart Hub settings to factory default settings. If you want reset Smart Hub, Enter password. NN The default password set is “0-0-0-0.” NN If you forget the password you created, press the following sequence of remote control buttons to reset the password to “0-0-0-0”: POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
●● Properties More: Display information about Smart Hub. Terms of Service Agreement: Display the Terms of Service Agreement.
❑❑ Using the Smart Hub service ■■ Samsung Apps Samsung Apps is a store for downloading applications to be used on Samsung TV/AV equipment. Users can enjoy a variety of contents such as videos, music, photos, games, useful information etc. using the downloaded applications. ◀ Additional applications will be available in the future.
NN Using the colour buttons with the Samsung Apps. ●● a Red (Login): To log in to the internet service. What’s New? What’s New? Video Game ●● b Green (List View / Thumbnail View): To change the view mode. Sports Lifestyle Welcome to Samsung Apps! More apps are in store for you to enjoy.
●● } Blue (Sort by): To sort the applications by Recommended, Most downloaded, Most recent or Name. ●● πµ (Page): Move to previous or next page. ●● R Return: Moves to previous menu.
Using the Samsung Apps by category The following categories are available: ●● What’s New?: Displays newly registered applications. ●● Video: Displays various video media such as movies, TV shows and short length videos. ●● Game: Displays various games such as sudoku and chess. ●● Sports: Displays various sports media such as match information, images and ◀ ▶ short length video.
●● Information: Includes various information services such as news, stocks and weather. ●● Other: Includes other miscellaneous services. ●● My Account: Displays the application list and your cyber cash balance. NN Starting in the middle of 2010 (US and Korea only), you can purchase cyber- cash for buying applications through tv.samsung.com. ●● Help: If you have questions about Smart Hub, check this section first.
[Legal Statement] Due to the various capabilities of products featuring the Samsung Smart Hub Content Service, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. ◀ Some features on Smart Hub may also require additional peripheral devices or membership fees that are sold separately. Please visit http://www.samsung. com for more information on specific device information and content availability.
■■ Skype For LED 6600 series and above Skype created a little piece of software that makes communicating with people around the world easy and fun. With Skype you can say hello or share a laugh with anyone, anywhere. And if both of you are on Skype, it’s free. Communicate with people around the world! NN For more information, download the Skype ◀ user's manual from “www.samsung.com.
■■ Web Browser For LED 6600 series and above 1. To open Web Browser, press the l / r / u / d buttons to select Web Browser, and then press the ENTERE button. The Web Browser may be displayed differently with PC. 2. The Web Browser is not compatible with a Java application. 3. When attempted to download a file, but the file could not be saved and an error message appeared. ◀ 4. Access may be blocked to some websites or to web browsers operated by certain businesses. 5.
7. Scrolling a web page that allows only part (and not the whole) of the page to be scrolled may cause corrupted characters. 8. ActiveX is not supported. 9. Some options cannot be accessed in Tab mode. (To access such options, switch to Pointer mode.) 10. Some text may appear corrupted because the number of supported fonts is limited. ◀ 11. The response to a command on the remote or the screen display may be delayed temporarily if a web page is currently loading. 12.
14. When writing emails or posting messages, some functions (Such as changing the size or colors.) may not be supported. 15. The number of bookmarks and logs that can be saved is limited. 16. The maximum number of windows that can open at the same time may vary depending on the browsing condition or TV model. 17. The web browsing speed depends on the network conditions. ◀ 18. PIP will automatically be deactivated if a video is played in the browser.
21. When you import or export the bookmark, the folder tree is not included. 22. If you import the bookmark file to a Computer from a TV, the bookmark file will be saved in “Samsung SmartTV Bookmark” folder. 23. If the time is not set in the menu (System → Time → Clock), the history information may not be saved. 24. Visited web site history is saved in chronological order and It will be removed from the list according to oldest page accessed. ◀ 25.
❑❑ Troubleshooting for SMART HUB ◀ Problem Possible Solution Some application contents only appear in English. How can I change the language? The Application content language may be different from the application user interface language. Some application services do not work. Check with the service provider. When a network error occurs, I can only use the setting menu.
All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider.
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
❑❑ About AllShare™ AllShare™ connects your TV and compatible Samsung mobile phones/ devices through a network. You can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. NN For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide.
NN If your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may occur during video playback. NN By connecting your Samsung TV to a network via AllShare™, you can use Samsung’s original functions as follows: –– Playback of various video formats (DivX,XVID, MP4, 3GPP, AVI, ASF, MKV, etc.
❑❑ Setting Up AllShare™ OO MENU → Network → AllShare Settings → ENTERE ■■ AllShare Settings ●● Media (On / Off): Enables or disables the media function. When the media function is on, Media contents play can be controlled by a mobile phone or other devices that support DLNA DMC. AllShare Settings Media ◀ ▶ ●● The displayed image may differ depending on the model.
■■ Media Shows a list of mobile phones or connected devices which have been set up with this TV for using the Media function. NN The Media function is available in all devices which support DLNA DMC. ●● Allowed / Denied: Allows/Blocks the the devices. ●● Delete: Deletes the devices from the list. NN This function only deletes the name of the device from the list. If the deleted ◀ device is turned on or tries to connect to the TV, it may appear on the list again.
Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played. NN NOTE ●● If the media function executes for the first time, the warning popup window ◀ appears.
●● To turn off the media contents transmission from the mobile phone, set Media to Off in the AllShare Settings. ●● Contents may not be played on your TV depending on their resolution and format. ●● The ENTERE and l / r buttons may not work depending on the type of media content. ●● Using the mobile device, you can control the media playing. For details, refer to ◀ each mobile’s user’s guide.
What is Anynet+? t Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. NN NOTE ●● You can only control Anynet+ devices using the TV remote control, not the ◀ buttons on the TV. ●● The TV remote control may not work under certain conditions.
For the method of connecting external devices , refer to the supported user manual. NN NOTE ●● Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre. ●● When following the connection above, the Optical jack only outputs 2 channel ◀ audio. You will only hear sound from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.
●● You can connect only one Home Theatre. ●● You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. ●● Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. ●● Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Device List ◀ Description Changes Anynet+ mode to TV broadcast mode. Shows the Anynet+ device list. (device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) TOOLS Shows the tools menu of the connected device. E.g.
❑❑ Setting Up Anynet+ ■■ Anynet+ (HDMI-CEC) (Off / On) t OO MENU → System → Anynet+(HDMI-CEC) → ENTERE To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. NN When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. ◀ ■■ Auto Turn Off (No / Yes) ▶ Setting an Anynet+ Device to turn off automatically when the TV is turned off. NN If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
❑❑ Switching between Anynet+ Devices 1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTERE button to select Device List. NN If you cannot find a device you want, select Refresh to refresh the list. 2. Select a device and press the ENTERE button. You can switch to the selected device. NN The Device List menu will only appear when you set Anynet+ (HDMI-CEC) ◀ to On in the System menu. ●● Switching to the selected device may take up to 2 minutes.
❑❑ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. NN If your receiver supports audio only, it may not appear in the device list. NN The receiver will work when you have properly connected the optical in jack ◀ of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. NN When the receiver (i.
❑❑ Troubleshooting for Anynet+ Problem Anynet+ does not work. Possible Solution •• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. •• •• •• •• ◀ Only one receiver (home theatre) can be connected. Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. •• Check whether the TV remote control is in TV mode.
I want to start Anynet+. •• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. •• Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. •• Select View TV in the Anynet+ menu. •• Press the SOURCE button on the TV remote control and select a non- Anynet+ device. ◀ The message “Connecting to Anynet+ device...” appears on the screen.
The connected device is not displayed. •• Check whether or not the device supports Anynet+ functions. •• Check whether or not the HDMI cable is properly connected. •• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. •• Search Anynet+ devices again. •• You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions.
❑❑ Using the Smart Hub Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device. Search Your Movie Samsung Apps Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries. 1. Press the SMART HUB button. For some of the countries listed, local language characters might not be displayed properly. 2. Press the d or u button to select desired menu (Videos, Photos, Music), then press the ENTERE button.
❑❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing recorded tv, photo, music and movie files to the USB [1(HDD), 2 or 3] port on the back or side panel of the TV. ◀ 3. When USB is connected to the TV, popup window appears. Then you can select Connected Device. TV Rear Panel USB Drive ●● The displayed image may differ depending on the model.
❑❑ Connecting to the PC through network You can play pictures, music and videos saved on your PC through a network connection in the AllShare mode. 1. For more information on how to configure your network, refer to “Network Menu”. ●● You are recommended to locate both TV and PC in same subnet. The first ◀ 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address: 123.456.789.**) 2.
NN Functions that are not supported when connecting to a PC through a network: ●● The Background Music and Background Music Setting functions. ●● Sorting files by preference in the Photos, Music, and Videos folders. ●● The π (REW) or µ (FF) button while a movie is playing. NN Divx DRM, Multi-audio, embedded captions are not supported. NN AllShare PC Software should be permitted by the firewall programme on your PC.
NN When you use media contents mode through a network connection, depending on the functions of the provided server: ●● The sorting method may vary. ●● The Resume, which resumes playing of a video, may not be supported. –– The Resume function does not support multiple users. (It will have only memorised the point where the most recent user stopped playing.) ●● The l or r button may not work depending on the content information.
Before using media contents functions... NN It might not work properly with unlicenced multimedia files. NN Need-to-Know List before using media contents ●● MTP (Media Transfer Protocol) is not supported. ●● The file system supports FAT16, FAT32 and NTFS. ●● Certain types of USB Digital camera and audio devices may not be compatible with this TV. ◀ ●● Media contents only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device.
●● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ●● Connect a USB HDD to the dedicated USB 1 (HDD) port. ●● Do not disconnect the USB device while it is loading. ●● The higher the resolution of the image, the longer it takes to display on the screen. ◀ ●● The maximum supported JPEG resolution is 15360X8640 pixels.
●● MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements. ●● If more than 2 PTP devices are connected, you can only use one at a time.
●● If the TV has been no input during time set in Auto Protection Time, the Screensaver will run. ●● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. ●● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
Screen Display Move to the file you desired using the u / d / r / l buttons and then press the ENTERE or � (Play) button. The file is played. Device name: Displays a connected device name. ◀ File List Section: You can confirm the files and groups that is sorted by each category.
❑❑ Recorded TV for LED 6400 series and above NN This function may not be supported depending on the region. To use the recording or Timeshift function, the connected USB device must be available for recording. Device format is recommended to use USB HDD. NN During the Device formatting, do not disconnect the device while formatting is in progress. If you format the device, all files will be deleted.
■■ Timer Recording (in Schedule Manager) Allows you to make a reservation to record a programme scheduled for broadcast. Set the current time first to use this function. Using the Timer Recording function (digital channels only) 1. Press the ENTERE button to select Schedule Manager. The Schedule Manager screen will be displayed. ◀ 2. Press the ENTERE button to add manual booking. A pop up screen will appear.
3. Press the l or r button to select the Timer Recording. NN We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported. NN A USB storage device cannot record until it completes the Device Performance Test. 4. Press the l / r / u / d buttons to set the Antenna, Channel, Repeat, Date, Start Time or End Time.
To record a current broadcasting programme Allows you to record a programme currently being broadcasted. Set the current time first to use this function. 1. When you watch a broadcast programme, press the � (REC) button on the remote to record. A pop up window will appear. NN We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported. ◀ NN A USB storage device cannot record until it completes the Device Performance Test. 2.
Using the Timeshift function If you missed a live broadcast, you can see from the recorded broadcast using this feature. 1. When you watch a broadcast programme, press the � (Play) button on the remote to start the Timeshift function. 2. If you want to stop the Timeshift function, press the � (Stop) button on the remote. ◀ NN The Timeshift mode operates for a maximum of 90 minutes. NN After the Timeshift mode function has run for the maximum time, the time information will be fixed to “00:00:00.
Before using the Timeshift and a record function... [[ Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs. Note that files saved on the TV cannot be used after the main board is changed. NN NOTE ●● We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported. ◀ ●● The availability of both recording and the Timeshift function may differ depending on picture quality and the free space on the hard disk drive.
●● If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed. ●● When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the HDMI-CEC feature, recording by the PVR function takes precedence. ●● During a playback or the Timeshift, the picture will be displayed according to the display settings of the TV.
●● If the USB device has failed the Device Performance Test, the USB device must go through the Device Format and Device Performance Test again before you record with the Guide or Channel. ●● The Timeshift functions can only be used with a USB storage device that completed the Device Performance Test. ●● If you attempt the recording or Timeshift function with a device that did not have the Device Performance Test, the function will not start.
●● If you press � (REC) on the remote control while the Channel screen is being displayed or record with Timer Recording, the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed to process the command. ●● If a USB device dedicated to recording is connected, existing Timeshift or recording files that were saved abnormally will automatically be deleted.
Playing Recorded TV Programme 1. Press the l / r / u / d button to select the desired file in the file list. 2. Press the ENTERE button or � (Play) button. ●● The selected file is displayed on the top with its playing time. ●● During playing the recorded TV programme, you can search using the l and r button. ◀ ●● You can use � (REW) and µ (FF) buttons during playback.
■■ Videos Playing Video 1. Press the l/r/u/d button to select the desired file in the file list. 1:02:15 / 2:04:10 1:02:15 / 2:04:10 2. Press the ENTERE button or � (Play) button. ●● The selected file is displayed on the top ◀ with its playing time. ●● If video time information is unknown, ●● The displayed image may differ depending on the model. play time and progress bar are not displayed. ●● During playing the video, you can search using the l and r button.
NN In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ●● Supported Subtitle Formats ◀ Name File extension Format MPEG-4 time-based text .ttxt XML SAMI .smi HTML SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .
●● Supported Video Formats File Extension *.avi *.mkv Container AVI MKV ◀ *.asf *.wmv *.mp4 ASF ASF MP4 Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 XviD 1920x1080 6 ~ 30 8 H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 Motion JPEG 1920x1080 6 ~ 30 8 Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 XviD 1920x1080 6 ~ 30 8 H.
File Extension *.3gp 3GPP *.vro VRO VOB *.mpg *.mpeg ◀ Container *.ts *.tp *.trp PS TS Video Codec Resolution Frame rate (fps) Bit rate (Mbps) H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 MPEG1 352x288 24 / 25 / 30 30 MPEG2 1920x1080 24 / 25 / 30 30 MPEG1 352x288 24 / 25 / 30 30 MPEG2 1920x1080 24 / 25 / 30 30 H.264 1920x1080 6 ~ 30 25 MPEG2 1920x1080 24 / 25 / 30 30 H.
Other Restrictions NN NOTE ●● Video content will not play, or not play correctly, if there is an error in the content or the container. ●● Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. ●● If the Index Table is in error, the Seek (Jump) function is not supported. ◀ ●● Video content can not be played, if there are many contents in one file.
Video Decoder Audio Decoder •• Supports up to H.264, Level 4.1 •• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. •• Supports up to WMA 7, 8, 9, STD •• WMA 9 PRO does not support 2 channel excess multi channel or lossless audio. •• XVID, MPEG4 SP, ASP: •• WMA sampling rate 22050Hz mono is not supported. −− Below 1280 x 720: 60 frame max −− Above 1280 x 720: 30 frame max •• GMC 2 over is not supported.
Playing movie file continuously (Resume Play) If you exit the playing Videos function, it can be played later from the point where it was stopped. NN The Resume function does not support multiple users. (It will have only memorised the point where the most recent user stopped playing.) 1. Select the movie file you want to play continuously by pressing the l or r button to select it from the file list section. ◀ 2. Press the � (Play) / ENTERE button.
■■ Music Playing Music 1. Press the l / r / u/ d button to select the desired music file in the file list. 2. Press the ENTERE button or � (Play) button. ◀ ●● During playing the music, you can search using the � (REW) and µ (FF) button. NN Only displays the files with MP3 extension. Music Playlist I Love You Ming 13/30 Music_1 No Singer Music_2 No Singer Music_3 No Singe g r Love R&B 2011-01-01 1.
Creating My Playlist 1. On the Music screen in the SMART HUB menu, press the l / r / u / d button to select Edit Mode, and then press the ENTERE button. 2. Press the l / r / u / d button to select the tracks you want to add and press the ENTERE button. NN The check box appears to the left of the selected files. NN To select all the files in the current page, select Select All at the top. ◀ 3. Press the l / r / u / d button to select Add to My Playlist.
4. Press the ENTERE button. The message Selected items added to My Playlist. is displayed. 5. The newly created or updated playlist will be in the main Music page. Playing My Playlist Select the My Playlist folder and it will play automatically. Press the u or d button to select a different music file within the play list. ◀ NN To delete a file from My Playlist, select the recycle bin icon next to the file you want to delete by using the direction buttons.
Playing the selected music files 1. On the Music screen in the SMART HUB menu, press the l / r / u / d button to select Edit Mode, and then press the ENTERE button. 2. Press the l / r / u / d button to select the desired music file in the file list, and then ENTERE button. NN NOTE ●● The check box mark appears to the left of the selected files. ◀ ●● To select all the files in the current page, select Select All at the top. ●● To cancel a selection, press the ENTERE button again. 3.
■■ Photos Viewing a Photo (or Slide Show) 1. Press the l/r/u/d button to select the desired file in the file list. Normal Friends.jpg 1024 X 768 2011/01/03 2. Press the ENTERE button. ●● When you press the � (Play) button ◀ in the file list, slide show will be started immediately. ●● All files in the file list section will be displayed ●● The displayed image may differ depending on the model. in the slide show. ●● During the slide show, files are displayed in order from currently being shown.
❑❑ Media Contents - Additional Function Sorting the file list Sorting by using the l / r / u / d To sort files in the file list, select the button. And then press the ENTERE button. Category ◀ Recorded TV Operations Videos Music Photos Default Default is sorted by Title without Group Folder View Displays the whole folder. You can view the file name and thumbnail by selecting the folder. > > > Title Sorts and displays the file title in Symbol/ Number/Alphabet/Special order.
Category Recorded TV Operations Videos Music Earliest Date Sorts and shows files by the earliest date. Artist Sorts the music file by artist in alphabetical order. > Album Sorts the music file by album in alphabetical order. > Genre Sorts music files by the genre. > Monthly Sorts and shows photo files by month.
Videos / Music / Photos Play Option menu During playback using Videos or Photos function, press the TOOLS button. The following functions are enabled during playback. Category ◀ Operations Recorded TV Videos Music Photos > > > > List Return to the file list. Previous / Next Go to previous / next photo file. Shuffle You can play the music sequentially or randomly. Resume A movie file will begin to play from where it was stopped.
Category ◀ Recorded TV Operations Videos Title Search You can move directly to another Title. > Time Search You can search the movie using l and r buttons at intervals of 1 minute. > Subtitle You can view a subtitle. You can select a specific language if the subtitle file contains multiple languages. > Repeat Mode You can play movie and music files repeatedly. > Picture Size You can adjust the picture size to your preference. > Picture Mode You can change the Picture Mode.
Category ◀ Recorded TV Operations Videos Audio Language You can enjoy video in one of supported languages as required. The function is only enabled when stream-type files which support multiple audio formats are played. > Subtitle Setting Displays the Subtitle Setting. You can set up a subtitle option. > Play / Pause You can start or stop. Alternatively, the � (Play) or � (Pause) button on the remote can be used.
Category ◀ Recorded TV Operations U Videos Music Photos Slide Show Effect You can set various slide show effects. > Background Music On You can start or stop a background music. > Background Music Setting You can set and select background music when watching a photo file or slide show. > Zoom You can zoom into images in full screen mode. > You can rotate images.
Other Information ❑❑ Troubleshooting If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. ◀ Issues Solutions and Explanations Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
Issues Solutions and Explanations The TV image does not look as good as it did in the store. •• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. •• Cable/Satellite subscribers: Try HD stations from the channel line up. •• Antenna connection: Try HD stations after performing Auto programme. NN Many HD channels are up scaled from SD(Standard Definition) contents.
Issues Solutions and Explanations Colour is wrong or missing. •• If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause colour problems or a blank screen. There is poor colour or brightness.
Issues Solutions and Explanations Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating. (go to MENU - Support - Self Diagnosis - Sound Test) If the audio is OK, the sound problem may caused by the source or signal. ◀ There is no sound or the sound is too low at maximum volume. •• Please check the volume the of external device connected to your TV. The picture is good but there is no sound.
Issues Solutions and Explanations The speakers are making an inappropriate noise. •• Check the cable connections. Make sure a video cable is not connected to an audio input. •• For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion. No Picture, No Video The TV turns off automatically. •• Ensure the Sleep Timer is set to Off in the Setup menu. •• If your PC is connected to the TV, check your PC power settings.
Issues Solutions and Explanations The picture is distorted: macro block error, small block, dots, pixelization. •• Compression of video contents may cause picture distortion, especially with fast moving pictures such as sports and action movies. •• A low signal can cause picture distortion. This is not a TV issue. PC Connection ◀ A “Mode Not Supported” message appears.
Issues Solutions and Explanations Recording / Timeshift for LED 6400 and 6600 Series The USB device is not recognized or a Device Format, Checking Device or Device Performance Test fails. •• See the manual for the USB device to check that the USB device supports recording. •• If the USB device has a lock, ensure it is off. •• Check that the USB device can be formatted when connected to the PC. Connect the USB to the TV and format it. (Formatting may fail intermittently.
Issues Solutions and Explanations The recording function does not work. •• Check that a USB device is connected. •• Check that the channel is a recordable digital channel. •• If the signal is weak or does not exist, the recording function will automatically be closed. •• The TV will not record if the USB device has no free memory space. Check that this is not the case. Timeshift Mode does not work. ◀ •• •• •• •• Check that a USB device is connected.
Issues Solutions and Explanations A message indicates a performance test failure, and the recording and Timeshift Mode functions do not work. •• These problems may occur if you use a low-capacity USB device that A scheduled recording has failed. •• A scheduled recording is disabled for certain operations (formatting, does not support recording. We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported.
Issues Solutions and Explanations Others The picture won’t display in full screen. •• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. •• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. •• Adjust the picture size options on your external device or TV to full screen. ◀ A “Mode Not Supported” message appears.
◀ Issues Solutions and Explanations The TV Signal Information is unavailable in the Self Diagnosis Test menu. •• This function is only available with digital channels from an Antenna / RF/ The TV is tilted to the side. •• Remove the base stand from the TV and reassemble it. There are difficulties assembling the stand base. •• Make sure the TV is placed on a flat surface. It is necessary to use The channel menu is greyed out.
◀ Issues Solutions and Explanations Your settings are lost after 30 minutes or every time the TV is turned off. •• If the TV is in the Store Demo mode, it will reset audio and picture You have intermittent loss of audio or video. •• Check the cable connections and reconnect them. •• Loss of audio or video can be caused by using overly rigid or thick settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Issues Solutions and Explanations The PIP menu is not available. •• PIP functionality is only available when you are using a HDMI, PC or components source. ◀ You turned the TV off 45 minutes ago, and it turned on again. •• It is normal. The TV operates the OTA (Over The Aerial) function itself to There are recurrent picture/ sound issues. •• Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture.
❑❑ Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. NN You can change Teletext pages by pressing the numeric buttons on the remote control.
(Teletext on/mix/off) Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext. 8 Stores the Teletext pages. / (store) 4 Displays the teletext on the upper half of the screen in double-size. To move the text to (size) the lower half of the screen, press it again. For normal display, press it once again.
Colour buttons (red, green, yellow, blue) If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed. Items can be selected in the same way. To display the previous or next page, press the corresponding coloured button. 0 (mode) Selects the Teletext mode (LIST/ FLOF).
(hold) Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again. 2 Displays the next Teletext page. 9 (page up) 3 Displays the previous Teletext page.
Typical Teletext page Part ◀ Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information.
❑❑ Licence TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence form SRS Lab, Inc. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ◀ Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.
DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.