Operation Manual

9 English
02 Getting Started
Front Panel
POWER BUTTON
USB HOST REMOTE CONTROL SENSOR
DISC TRAY
PLAY/PAUSE BUTTON
OPEN/CLOSE BUTTON
LED INDICATOR
Red: Power off
Green: Power on
Blue blinking: Remote control or
Front key input, Software update
STOP BUTTON
| NOTES |
\
To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.
\
When the product displays an Ultra HD Blu-ray or standard Blu-ray Disc's menu, you cannot start the
movie by pressing the Play button on the product or the remote control. To play the movie, you must
select Play Movie or Start in the disc's menu, and then press the OK button on the remote control.
Rear Panel
LAN
HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
LAN
HDMI OUT
SUB
(Audio Only)
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
HDMI OUT
HDMI 1 outputs audio and video
HDMI 2 outputs audio only
LANPOWER DIGITAL AUDIO OUT
| NOTE |
\
To use the Anynet+ (HDMI-CEC) function, connect an HDMI cable to the HDMI 1 terminal.
If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be
available.