User Manual

16
English
Basic Features
Go to Stored Position: Rotates the antenna to the
stored satellite position.
Antenna Position: Adjusts and stores the antenna
position for the selected satellite.
Store Current Position: Stores current position as
the selected positioner limit.
Signal Quality: Display the current status of
broadcasting signal.
Installer Mode: Sets limits to the scope of movement
of satellite antenna or reset the position. Generally,
installation guide uses this function.
Limit Position (East / West): Selects the direction of
the positioner Limit.
Antenna Position: Adjusts and stores the antenna
position for the selected satellite.
Store Current Position: Stores the current position
as the selected positioner Limit.
Go to Zero: Moves the antenna to the reference
position.
Reset Positioner Limit: Allows the antenna to rotate
over the full arc.
Reset All Setting (OK / Cancel): All satellite settings will
be reset to the initial values.
Editing Channels
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the
Edit Channel Name or Edit Channel Number menu.
Edit Channel Name (analogue channels only): Assign
your own channel name.
Edit Channel Number (digital channels only): Edit the
number by pressing the number buttons desired.
Other Features
Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
Freq.Start / Freq.Stop: Set the start or stop frequency
(differs in each country)
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
Channel Manager
Channel Manager Option Menu
Set each channel using the Channel Manager menu options
(Lock / Unlock, Timer Recording, Timer Viewing, Sort,
Reorder, Delete, Select All / Deselect All). Option menu
items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
NOTE
x
This function is available only when the
Child Lock is set to On.
x
The PIN input screen appears. Enter your
4-digit PIN, the default of which is “0-0-0-0”.
Change the PIN using the Change PIN option.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
When a digital channel is selected in
Channel Manager, press the button to view
the digital Programme.
Sort (analogue channels only): This operation allows
you to change the programme numbers of the stored
channels. This operation may be necessary after using
the auto store.
Reorder (when the Antenna was set to Satellite):
Rearrange the channel manager in numerical order.
Delete: You can delete a channel to display the channels
you want.
Select All / Deselect All: Select all the channels
or deselect all the selected channels in the channel
manager.
[UC6700]BN68-02841B-00L04.indb 16 2010-03-04 오전 11:29:55