ENGLISH English French German SAM SU UF NG DIG -80D X ITAL PR P ESEN LAM TER ZOO + - M INT T FR /EX EEZ E AW C BRIG HT AF ROTA TE Italian USER'S MANUAL UF-80DX/ST Before attempting to operate this product, Please read the instructions carefully. www.samsungpresenter.
UF-80 Special features Thank you for purchasing this product. This product is a high resolution digital presenter that can project all kinds of data on a PC monitor, or a projector with simple manipulations. 14X optical zoom lens and 3X digital zoom By adopting 14X super optic angle zoom lens, it is possible to shoot all materials from the size of a 35mm film to A4 size. Adopting 850,000 pixels CCD By adopting 1/3 inch PS type CCD, the high resolution and the excellent color reappearance are realized.
English Features French German Various image control Digital features on your Digital Presenter provide useful and various image controls including: - Brightness and Red/Blue color control - Image rotation - Image save/recall - Image freeze - Image divide Input source selection You can quickly switch to your computer and the presenter with the INT/EXT button on the control panel or on the remote controller.
UF-80 Contents Product features and structure Safety precautions..................................................................5 Uses of digital presenter ........................................................6 Supplied accessories .............................................................7 Name and function of each part ............................................8 Front side............................................................................8 Main control panel ...........................
German 10. Never push objects of any kind through cabinet slots. Never spill liquid of any kind into the presenter. 11. Except as specifically explained in this User's Manual, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. 12. Unplug the presenter during lightning storms or when it will not be used for extended periods. 13.
UF-80 Uses of digital presenter Conference Detailed information in a report, form, table, etc. as well as a three dimensional object, such as a model, can be projected on a screen clearly that all the participants can focus on the same topic during a conference. Thus it is very helpful for an effective progress of a conference.
English Supplied accessories When you unpack your Digital Presenter, make sure that you have all these components. DVI cable Remote controller French User's Manual German Power cable PS/2 Mouse Lens cap PC Monitor cable USB Cable UF-80 program etc.
UF-80 Name and function of each part Front side LAMP BRIG HT
German IR Sensor French Can rotate to the front and back. English Lens Main support Lamp unit (Upper lamp) Main lock button Press to move the main support. Italian BRIG Please set the paper fitted to the corners.
UF-80 Name and function of each part Main control panel The buttons on the main control panel can be found in the remote controller. These buttons perform the same functions. POWER AWC Use this to turn the main power on or off. Use this to control the color manually. LAMP AF Use this to turn the upper lamp on or off. Use this adjust the focus manually. ZOOM ROTATE (FOR THE UF-80DX ONLY) Use this to control the size of an object projected on the screen.
English Name and function of each part Terminals at the back French German POWER INPUT TERMINAL VGA VIDEO OUTPUT Use this to connect the power cable. (DC12V) Connect this to the RGB input terminal of a PC monitor or a projector by supplied PC cable. VGA VIDEO INPUT When Lightbox is used you can connect the Lightbox cable to the INPUT terminal located next to the switch of the Lightbox. DC 12V OUT, 0.6A Connect this to the VGA output terminal of another device by supplied PC cable.
UF-80 Name and function of each part On the remote controller POW ER 1 INT 3 /EX 2 T TXT /IMG FOC US LAM P F 5 1 + N FRE BR IGH T- IT ROT ATE TEL E PR 9 10 11 EZE BR IGH T+ WID E EX 6 3X3 Q 15 - 8 FRE 6 + 3 5 AW C 12 E - 7 8 BLU 2 4 AF 7 4 RED 14 13 ES SAV E RE CA ET 16 SAV LL E DIV IDE AC T IVE SH IFT DIG ITA LP RE SE NT ER (UF -80 ) Page 12 17
English ROTATE (FOR THE UF-80DX ONLY) Turns power on or off. Use this to rotate the image by 90˚, 180˚, 270˚, 0˚. French POWER Allows to choose the signal inputs to be displayed. TXT/IMG Controls the sharpness of the output image. Switches for TEXT mode or IMAGE mode. German INT/EXT WIDE/TELE • Reduces the image size. • Enlarges the image size. BRIGHT + / BRIGHT • Increases the brightness. • Decreases the brightness. LAMP Turns the upper lamp on or off.
+ ZOOM FREE ZE AW C AF T ROTAT E HT TER BRIGH IG SEN T BR PRE 0DX ITAL UF-8 G DIG /EX IRIS SUN INT - SAM - + AF LAMP E MP C E ROTAT LA AW ROTAT AF T DI ZE T BRIGH G FREE BRIGH FR C R DX ENTE -80 ES UF GITAL PR + ZOOM T ZOOM AW UN TER /EX TER EEZE MS UF SEN INT UF SEN T SA SUN PRE - SUN PRE /EX TATE RO SAM ITAL -80D X G DIG LAMP SAM ITAL -80D X G DIG INT AF SEN + - C PRE LAMP AW ZOOM E ZE TER ROTAT EE X AF FR ITAL UF-8 0
English Connecting to output device PC Monitor, Projector or DVI supporting devices French X LAMP L PRESE 80D DIGITA UF- NG NTER + - ZOOM INT/E FREE XT ZE BRIG AWC German SAMSU Connect PC monitor, Projector and DVI supporting devices(Monitor or Projector)to this presenter to display the projected images using the PC monitor cable or DVI cable cancel this sentence.
UF-80 Connecting to output device Desktop computer SAMSU Connect a desktop PC and the presenter using USB cable and install the supplied program. You can see the projected image on the PC monitor and control the image using the program. RS-232C connection is available for advanced user. If you connect a PC with RS-232C cable, you should set up your PC and make your own program to control the projected image on PC. Ask your dealer for further details.
English Connecting to output device Computer French X LAMP L PRESE 80D DIGITA UF- NG NTER + - ZOOM INT/E FREE XT ZE BRIG AWC HT German SAMSU If you connect computer through VGA IN port, you can receive video signal from the computer. AF ROTA TE Connection Connect the cable to the VGA input terminal DVI MOUSE RS-232C VGA OUT VGA IN USB Digital Presenter PC monitor, projector, etc. Connect the cable to VGA IN terminal using the VGA cable from the computer.
UF-80 Using the presenter To show the image received from external device 1 Set up your digital presenter properly. (See page 14.) SAMS DIGIT AL PRES UF-80 UNG ENTE P DX LAM R + - ZOO M INT/ FRE EXT EZE BRIG AWC HT AF ROT ATE 2 3 Connect the input device from which you want to receive the image and the output device in which you want to show the image. (See pages 15 through 17.) Turn the power of the input and output device on, and the digital presenter on.
French 4 English Using the presenter Choose the video source with the INT/EXT button of the presenter. German C + POW ER LAMP INT /EX T - TXT /IMG FOC US INT/EXT BRIGHT LAM P F RED 1 + N BLU E 2 4 + - AF 3 5 7 AW C 8 6 • Each time you press the button, the display shows EXT OUT, INT OUT • EXT OUT View the image from an external VGA output device through a PC monitor or a projector connected to the digital presenter.
UF-80 Using the presenter To project an object on the digital presenter 1 Set up your digital presenter properly. (See page 14.) SAMS UF-80 UNG ENTE P DX LAM DIGIT AL PRES R + - ZOO M INT/ FRE EXT EZE BRIG AWC AF HT ROT ATE 2 3 Connect the presenter to a PC monitor or projector to display the image. (See page 15.) Turn the power of the output device and the digital presenter on.
5 English Using the presenter Each time you press the button, the lamp is on or off. French ZOOM FREEZ POW ER + German INT /EX T LAMP TXT /IMG FOC US - LAM P F RED 1 INT/EX + N BLU E 2 4 + - AF 3 5 7 AW C 8 6 Upper lamp. Use the upper lamp to project paper document and other material, and use lightbox lamp to project transparency. SAM SUN ITAL UF-80 G DIG PRE SEN P DX LAM TER ZOO + - M INT T FRE /EX EZE AW BRI C AF GHT ROTAT E Lightbox.
UF-80 Using the presenter 7 Focus on the object. • Auto focus control: Press AF button. • Manual focus control: press [Focus F] or [Focus N] to adjust manually.
English Adjusting your image Use the control buttons on the remote controller or on the control panel of the presenter to adjust the projected image. Some of the main features are described below: French Adjusting image size Press WIDE or TELE button on the remote controller to change the image size displayed on the screen. + ZOOM or ZOOM FREEZE - button of the presenter to achieve the same result.
UF-80 Adjusting your image Adjusting image color For automatic color adjustment, press AWC button. If you want fine level adjustment, press BLUE + / - or RED + / - button on the remote controller to increase or decrease blue or red color factor manually. ZOOM FREEZE INT /EX T AWC AF TXT /IMG FOC US + LAM P F RED 1 + N 3 5 7 AW C INT/EXT 6 8 3X3 FRE Q BRIGHT + - AF - LAMP BLU E 2 4 FRE EZE BL U II E9 II 0 II II The color level will be displayed.
English Adjusting your image Image rotate control(For the UF-80DX only) French For image rotation, press ROTATE button. To rotate the image by 90˚, 180˚, 270˚, 0˚, press ROTATE button. 2 4 FREEZE AF ROTATE + 3 5 7 AW C - German AWC - AF 6 8 3X3 FRE Q FRE EZE EX INT/EXT BRIGHT SAV RO TA TE 90 ˚ IT BR IGH TPR E RE CA LL ROT ATE BR IGH T+ WID E SAV TEL E ES ET E The rotate image status will be displayed.
UF-80 Adjusting your image Screen 2 divide and image shift(For the UF-80DX only) You can see both the image of an object currently projected and the image saved in memory simultaneously on one screen. Press DIVIDE button and press the memory location P F RED 1 + N 4 AW C E SA VE BR 6 8 3X3 BR EX IT - Q FRE WID 3 5 7 number within 4 seconds to recall the image you want to see. To cancel this mode and return to normal mode, press EXIT button.
English Adjusting your image Saving custom user setting F OC LA M F RE D 1 + N AW C 6 8 E ZE ROT ATE BR IGH T+ BR IGH T- SA VE DIV IDE To recall your custom setting, press the ACTIVE button and press the memory location number within 4 seconds. 3X 3 PR ES ET RE CA LL - E P Q F RE SA VE 3 5 7 EX IT + - AF WID E BL U 2 4 FR E /IMG US To save the current value, press SAVE button and specify the memory location within 4 seconds using the number keys from 1 through 4.
UF-80 Adjusting your image with GUI Samsung Digital Presenter supports to GUI menu system to control various functions of presenter with mouse operation. To use GUI menu system, first of all, mouse device (PS/2 type) must be connected to mouse control terminal, if it is connected with success, mouse pointer will be appeared on the screen. And then click the right mouse button, GUI main menu is appeared on the screen, and GUI menu system is activated.
English Adjusting your image with GUI Focus French Allow to focus an object in the far / near distance, or automatically. When holding down [Far]/[Near] menu with the left mouse button, focus is activated. Click [Auto] menu to work auto focus function. German Zoom Allow to change the image size. When holding down [Tele]/[Wide] menu with the left mouse button, zoom is activated. Italian Bright Allow to change IRIS to increase or decrease the brightness.
UF-80 Adjusting your image with GUI Red / Blue Allow to adjust image color through the red/blue gain control When holding down [Up]/[Down] menu with the left mouse button, red/blue gain control is activated. AWC Allow to adjust image color automatically through automatic white balance control When you click [AWC] menu with the left mouse button, AWC function is executed once.
2 English Adjusting your image with GUI Digital section French Digital menu deals with various digital image processing function. German Freeze Allow to keep the current image on the screen. Click[Freeze] menu with the left mouse button, freeze mode is activated and [Freeze] menu turns checked state. To release freeze mode, click [freeze] menu again or click [Cancel] menu with the left mouse button (and then [Freeze] menu turns unchecked state).
UF-80 Adjusting your image with GUI Save / Recall(For the UF-80DX only) Allow to save the projected image into the memory of digital presenter or recall the image from the memory. To save / recall the image with the proper save number, Click [numbers] menu with the left mouse button, current image is saved into or recalled from memory.
English Adjusting your image with GUI Divide(For the UF-80DX only) French Allow to divide the screen to show both of the current image and the image recalled from the memory simultaneously on one screen. Click [numbers] menu with the left mouse button, screen is divided and selected number of the image is recalled from memory. German Shift(For the UF-80DX only) Allow to shift the recalled image shown in the divided screen to show the hidden portion of the image.
UF-80 Adjusting your image with GUI 3x3 Multi(For the UF-80DX only) Allow to see all the images in the memory (up to 8 frames) on one screen. Click [3x3 Multi] menu with the left mouse button, 9 divide mode is activated and GUI menu disappeared. If you click the image number on screen, selected image will be expanded to full screen and GUI menu is appeared on the screen. To Release 3x3 Multi mode, click the center image.
Miscellaneous section French 3 English Adjusting your image with GUI Misc menu deals with miscellaneous function of digital presenter. German Preset Save / Exe Allow to save the customized user setting values or to activate the preset user setting. Click [numbers] menu with the left mouse button, current setting value is saved to flash ROM or load setting value from flash ROM.
UF-80 Adjusting your image with GUI Lamp Allow to turn the lamp on or off. Click this menu with the left mouse button, lamp mode is switched to current value. Aperture Allow to control the sharpness of the output image (default:On). Click [Aperture] menu with the left mouse button to turn on/off aperture mode.
4 English Adjusting your image with GUI Exit section French GUI main menu disappears and only the mouse pointer remains displayed. German Tips : Drag and Drop Function GUI main menu can take any position of screen using Drag and Drop. First of all, click the moving point of main menu, and then drag and drop to any position of screen where you want. 1. Click the moving point image 2. Drag the GUI main menu 3.
UF-80 Changing your image with Draw Samsung Digital Presenter supports GUI Drawing system to draw straight lines, freehand lines, rectangular on the screen with mouse operation. To use GUI Drawing system, first of all, GUI menu system and [Freeze] or [Recall] function must be activated. Then Draw menu is activated. (See page 28) When [Draw] menu is clicked, GUI Draw toolbar is appeared on the screen and GUI main menu disappeared.
1 Exit Button French Use the Exit button ( full screen. ) to exit GUI Drawing system to normal mode, or clear all the user’s images on the German 2 English Changing your image with Draw Tool Selection Use the Line Width Selection to set the line width to between 1 and 4 pixels. Drawing the single line To draw a single line, Click the single line icon and then, 1) Position the cursor on the screen where you want the line to start. 2) Press and hold the left/right mouse button. 3) Drag the mouse.
UF-80 Changing your image with Draw 3 Foreground / Background Color Panel There are two active colors in GUI Drawing System, the foreground (left mouse click) and background(right mouse click) colors. You can change the brush colors by selecting new foreground and background solid colors using the Color Palette. 4 Foreground / Background Color Palette Use the Color Palette to select the colors that you want to draw the line. Move the cursor over the available colors panel.
German DIGI UF-8 UNG PRES 0DX ENTE R ZOO M ZE AW C AF ROTA TE SAM DIG UF-8 SUNG PRESE 0DX ITAL LAMP NTE R ZOOM + - FREE /EX T ZE AW C BRIGH T AF ROTAT E 4 Turn the lamp to be original position. INT Attach the lens cap. French SAMS FREE 2 TAL LAM P + - EXT BRIG HT 3 Turn the head upside down. INT/ 1 Turn the power off and unplug the power cord.
UF-80 SAM SUN SEN 0DX ITAL UF-8 G DIG PRE LAMP TER INT ZOOM + - T FREE /EX ZE AW BRIGH C AF T ROTAT E POWE R RAMP INT ZOOM + - T FREE ZE /EX AW IRIS C AF ROTAT E 42 Page While you push the main lock button toward the front of the presenter, fold the arm shaft completely.
! No image appears French ? English Trouble shooting ? German - Check if the input selection of the output device is appropriate. - Check if the iris control is adequate. - Check if the VGA cable is connected to the VGA output terminal correctly. - Check if the lens cap is removed. No communication between the PC and USB. - Make sure the operating system is Windows 98 or later. It doesn't work on Windows 95.
UF-80 Battery replacement 1 Open the battery compartment lid at the back of the remote controller. 2 Insert new batteries. • Battery type:AAA type 1.5V 3 Page 44 Close the lid.
English Specifications Note: Specifications are subject to change without notice. Dimensions(mm) Weight Accessories 20 frame/sec Internal sync. 1024 x 768(XGA) RGB color.
UF-80 Memo