Contents (Windows Program) Installing Samsung Digital Presenter Software......3 System requirements ...............................................................................3 Installing software ....................................................................................4 Connecting Samsung Digital Presenter to PC .................................4 Installing USB driver .........................................................................5 Installing Samsung Digital Presenter program .....
Contents (Macintosh Program) Installing the UF-80 Viewer ...................................................................37 System Requirements .............................................................................37 Connecting the UF-80 .............................................................................38 Program Installation ................................................................................39 Running the UF-80 Viewer.......................................................
Installing Samsung Digital Presenter Software The supplied Samsung Digital Presenter program CD contains : • USB driver • Samsung Digital Presenter program To control your Samsung Digital Presenter on the PC, save the images into the computer HDD, or print the images, you must connect Samsung Digital Presenter to the PC through USB interface, then install the USB driver and Samsung Digital Presenter program using the supplied program CD. Follow the procedures below.
Installing software To install the software 1. Connect your Samsung Digital Presenter to the PC with USB cable. See the current page. 2. Install the USB driver. See page 5. 3. Install the Samsung Digital Presenter control program. See page 7. Follow the instructions below to complete the installation: Connecting Samsung Digital Presenter to PC 1. Make sure that both the Samsung Digital Presenter and a computer are turned on. 2.
Installing USB driver 1. The Add New Hardware Wizard dialog box appears. ( Case of Windows XP ) 2. Put a checkmark on the Install from a list or specific location (Advanced) box and click Next. ( Case of Windows XP ) ✔ Note : In the Windows 98, it may demand the Windows 98 original CD.
3. Insert the SAMSUNG program CD into your CD-ROM drive, then put a checkmark on the CD-ROM drives box and Include this location in the search box then type x:\ (where x is the drive letter for the CD-ROM drive). Click Next. 4. Click Finish. The USB driver will be inserted.
Installing Samsung Digital Presenter program 1. Insert the Samsung Digital Presenter Program CD in a CD-ROM drive and the install program will be auto-run. And then select ENGLISH.Click Next. 2. The InstallShield Wizard window opens. 3. You can select components you want to install.
4. Choose installing MPEG-4 Video Codec for compressing AVI file in UF-80 AVI Capture Program. If you do not install MPEG-4 Codec, You cannot compress AVI file. We recommend to install codec. 5. When installing MPEG-4 codec, Hardware Installation dialog box appears. Click [Continue Anyway] to complete setup. AVI Capture program shortcut and the software manual appears in the [Start] Menu. 6.
Installation tips How can I determine if my computer’s USB port is enabled ? 1. We will explain by Windows XP. Please find the Device Manager in other Windows version for yourself. 2. Select Start System Device Manager 3. If you see USB host controllers and a USB root hub listed, USB interface is properly enabled. 4. If you see USB Enhanced Host controller listed, USB 2.0 mode is properly enabled.
How do I remove the USB driver and Samsung Digital Presenter program ? USB Driver : 1. We will explain by Windows XP. Please find the Device Manager in other Windows version for yourself. 2. Select Start System Device Manager 3. Click the plus (+) icon before the Imaging Device. 4. From the Imaging devices items select Samsung Digital Presenter UF-80, then click Remove. In the Confirm Device Removal dialog box, click OK. Samsung Digital Presenter Program : 1.
Running Samsung Digital Presenter Program 1. Make sure that your Samsung Digital Presenter is connected to the PC and both are turned on. 2. Double-Click the UF-80 USB Viewer icon (automatically placed on the Windows desktop when you install). You can also select Samsung Digital Presenter Program UF-80 USB Viewer program by clicking Start 3. Samsung Digital Presenter View Panel and Control Panel are opened. 4. The current USB status (USB 2.0 mode or USB 1.1 mode) is written on Control Panel title bar.
Samsung Digital Presenter View Panel overview 4 1 2 1 3 View area You can see the images presented from the presenter in this view area. When you adjust the image using the Samsung Digital Presenter Control Panel or remote controller,you can see the applied result in this area.
2 • View Panel button description (It is invisible in FULL mode). Allows you to select the input image size. QUAR : 256 x 192 size of image, normal View Panel window HALF : 512 x 384 size of image, normal View Panel window. Press [Esc] key if you want to return HALF mode in other mode. FULL : 1024 x 768 size of image, Control Panel is closed and Mini Control Panel opens. (It is recommended to select this mode in a XGA or higher Monitor.
4 Option Dialog 1. Current Q-SAVE folder path (USB 2.0 only) You can change Q-SAVE folder to save images when you press Q-SAVE button or [F2] key. (For details about Q-SAVE, see page 23.) 2. Auto-Hide Mini Control Delay You can adjust the time you want to display Mini Control Panel in SCREEN FULL mode. The default value is 5 seconds. The value ranges 0 to 30. When you set 0 seconds the Mini Control Panel is always visual. (For details about Mini Control Panel see page 22.
Samsung Digital Presenter Control Panel overview With the Samsung Digital Presenter program, you can control and adjust the images presented from your presenter. You can also save it as a graphic file and print the images through the printer connected to the PC. 2 1 3 Using Samsung Digital Presenter Control Panel 4 1. You can control capture, save and print images on the Control Panel. 5 6 2.
1 2 3 ControlPanel Mini Control Panel switch button In FULL mode you can change Control Panel to Mini Control Panel. HALF button (It is invisible in usual Control Panel.) This button appears when you call Control Panel in the FULL mode. It makes program to return normal window. (Hotkey : [Esc] key) Wide/Tele: Reduces or enlarges the image size on the screen. Near/Far: Adjusts focus 4 IRIS+/-: Adjusts the brightness of the image on the screen. Blue +/-: Adjusts the blue color.
6 Lamp ON/OFF: Turns the lamp On/Off. 7 Rot. (Rotate): To rotate the image by 90° / 180° / 270° / 0° The images on the View Panel do not change. (For the UF-80DX only) Aper. (Aperture): Turns on/off aperture mode. (TEXT MODE/IMAGE MODE) Fz. (Freeze): Turns on/off Freeze mode. The images on the View Panel do not change. Hz (Frequency): Switches frequency of the presenter between 60Hz and 75Hz. The images on the View Panel do not change. Ext. (External): Use this to select internal or external image.
9 DIGITAL FUNCTION/PRESET button inter-operates with the number button (1~8). (Refer to Samsung Digital Presenter User’s Manual) I-sav(Image Save) / I-rcl(Image Recall) : • Saves the projected image into the memory of this unit. • Recalls the image from the memory. •To save/recall the image, press I-sav / I-rcl button and specify the memory location within 5 seconds using the number keys from 1 through 8.
Capturing/Saving/Printing images You can save the image currently displayed in the View Panel as a BMP or JPEG format graphic file. Do as follows: 10 1. Samsung Digital Presenter View Panel displays image currently presented from Samsung Digital Presenter. When the desired image is displayed in the View Panel, click Capture button. 2. When capturing is complete, the Release button,Save button and Print button are activated. Saving Images 1. Click [Save] button to save captured image in the Capture mode.
Printing images 1. When capturing is complete, the Print button is activated. Click Print button,then the Print page Setup dialog box prompts. 2. Select Paper Size/Print Position/Print Size/Orientation etc. ■ Fit to page : The image is fit to the page size you selected. ■ Specified : You can specify the printing size of image. ■ Maintain aspect ratio ■ Margins : You can set the margins of the paper. ■ Orientation: You can set the printing orientation.
3. Select print options and click OK to start printing. 4. After printing is complete, click Release button to release the capture mode. If you do not release the capture mode, the View Panel remains occupied with the captured image. ✔ Note : • The Save/Print size is originally set to the same one as View Panel image size. To Save/Print the Full size(XGA) image, check the ‘Always Full Resolution Save/Print’ item in the Option dialog box. • It may take 0.5 ~ 2 seconds to capture or release image in USB 1.
Samsung Digital Presenter Mini Control Panel overview Mini Control Panel is used not to hide the image in the FULL mode and it is composed to key functions of Control Panel. If you want to use the Control Panel, press 5 button. 5 1 1 Wide / Tele / AWC : See page 16. 2 Capture Image/ Save / Print : See page 19. 3 DIP : See page 24. 4 Half : See page 16. 5 Opens Control Panel on which you can control all functions of presenter.
Quick Save ([F2] key) You can save quickly by button or hotkey. Q-SAVE is only available in USB 2.0 mode. The image file path can be set in Option dialog box. (The default path is located where the Samsung Digital Presenter program is installed + QuickCap.) How to Q-SAVE 1. When the closed image is displayed in the View Panel, Click Q-SAVE button or press [F2] key to save quickly. 2. In ‘QuickCap’ folder under the directory where your program is installed, the captured image is saved as JPEG format.
Applying DIP (Digital Image Effect Processing) Functions DIP produces a impressionistic effect on a selection by displaying pixels and by finding and highlighting contrast in an image. The original image of presenter doesn’t change. The DIP image is transformed just in the PC. DIP is available only in USB 2.0 mode. Using DIP for Digital Image Effect 1. While the image from presenter is displayed, if you click DIP button on (Mini) Control panel, DIP Panel opens.
Digital Image Effect Processing Description 1) Default: The original image (RGB colors) [Uses : Displays the original image from the Digital Presenter.] 2) Grayscale: The image(RGB colors) is changed to grayscale. [Uses : You can enhance readability or legibility of the image.] 3) Histogram: The program shows the histogram on the left-up side. This effect is available on Default, Grayscale, Binarization mode. [Uses : Lets you adjust the Digital Presenter's bright value or turn the lamp On/Off efficiently.
7) Image Rotation: This effect lets you rotate an entire image. You can rotate the image easily (–180˚ ~ 180˚) by mouse or [ ], [ ] keys. You may not see the whole image because the image is rotated on the center. [Uses : Rotates an Image -180~+180 degree to View or Save an image.] 8) Emboss: Makes a selection appear raised or stamped by converting its fill color to gray and tracing the edges with the original fill color. [Uses : Applied to Image Analysis / Image Interpretion in the Computer Vision.
Using Samsung Digital Presenter TWAIN Driver 1 System requirement • Samsung Digital Presenter USB device driver • TWAIN supported application program * To use TWAIN driver your PC had been installed Samsung Digital Presenter USB device driver. 2. Install Samsung Digital Presenter TWAIN driver • Refer to install Samsung Digital Presenter program (See page 7 for details.) • If you’ve not installed TWAIN driver in InstallShield program you have to install it separately.
Scanning Images 1 The images from a presenter are displayed on the View Panel. Select the size you want to scan through TWAIN. (The default size: HALF mode on View Panel) 2 Press Capture button to scan in application program. 3 When completed Capture, the TWAIN Scan button activates. If you click the button, the captured image is transferred to the application program. 4 For more information about TWAIN Driver, refer to the graphic application software manual.
Keyboard Map Keys [Alt + Enter] Description Remark Set the window SCREEN FULL mode. [While displaying] Return to HALF size mode [ESC] [While capturing] Release captured image [F2] [Alt + F4] You can specify the path your Q-SAVE images are saved. (See page 23.) For operating Q-SAVE the other functions are temporarily unavailable. Exits this program.
Using Samsung Digital Presenter AVI Capture With the Samsung Digital Presenter AVI Capture program, you can capture digital images from Digital Presenter (512x384 pixels, 20 frame/sec) to AVI file (USB 2.0 only) 1. Make sure that your Samsung Digital Presenter is connected to the PC and both are turned on. 2. Select and Click [Start] Capture] [Program] [UF-80 USB Viewer] [UF-80 AVI 3. AVI Capture program is available in USB2.
✔ Caution : • In case of FAT32 file system of your PC, the single file size limited by maximum 4 GB. Check your Windows file system in volume property dialog. You must format or convert your file system to capture more than 4 GB on single file. We recommend to use MPEG-4 video Codec. (Ask the technical support to use Format, Convert command) Maximum File Size FAT32 NTFS 4 GB No limit No Compression Approx. 6 Min No limit MPEG-4 High Quality Approx. 12 Hours No limit MPEG-4 Low Quality Approx.
4. Using UF-80 AVI Capture Program (1) Capture Time Limits You can set capture time limits to capture AVI file for a fixed period by minute. Program will show required HDD space approximately based on the Compression Mode. ✔ Note : The Captured AVI file size may be different from approximate captured file size because of the amount of motion of images or dropped frames.
(3) Capture Status Once You've started recording, status lamp turns on red light and capturing time displays below status lamp. (4) Flip image vertical According to digital presenter lens position, preview images can be reversed. So, using Flip image vertical option, you can capture the right direction image (5) Frame rate per second The Frame rate per second choices let you specify how many movie frames per second will be recorded. We recommend 20 frames/sec.
(9) Stop Stop button will be activated when capture process stated, you may save AVI file safely by clicking Stop button. (10) Exit Exits AVI capture program. ✔ Notice : 1. While capture processes, Do not turn off power of the presenter or remove the USB cable off the PC. It may cause the presenter or the PC to make trouble. 2. While capture processes, [Exit] button would not finalize AVI file. For saving AVI file safely, Push [Stop] button first. 3.
Troubleshooting Symptom Solution Fails to run Samsung Digital Presenter program There is a communication error between Samsung Digital Presenter and the computer. Exit Samsung Digital Presenter program and do as follows: • Unplug the USB cable and then plug in it again. • Close other unnecessary software programs that are running (especially programs related to USB communication and which occupy many system resources). • If you turn the unit off, turn it back on after at least 10 seconds.
Symptom Solution The following error message (Windows XP message): “HI-SPEED USB device is plugged in non-HISPEED USB hub. ” The system operates USB 1.1 mode like this case. • Make sure that the USB 2.0 function is ON in CMOS. • Download and install Microsoft USB patches.(KB822603) Select Start System • On [Control Panel] Device Manager [Universal Serial Bus controllers] lists select the property of USB 2.0 root hub and select the Power Management tab.