User guide
Table Of Contents
- Before Using the Product
- Preparations
- Connecting and Using a Source Device
- Using MDC
- Home feature
- Screen Adjustment
- OnScreen Display
- System
- Sound Adjustment
- Support
- Troubleshooting Guide
- Specifications
- Appendix
37
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
Connection Using an DP Cable
DP IN
Precautions for using DP
To increase the standby power capacity, the product stops DP communication when it is
turned off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode, monitor
setting changes may not be updated. As a result, screen output may not be displayed
properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the product.
Some graphics cards that are not compliant with the DP standard may prevent the
Windows Booting/Bios screen from being displayed when the product is in power-saving
mode. If this is the case, make sure to turn on the product first before turning on your PC.
The DisplayPort interface (DP IN) on the product and the provided DP cable are designed
based on the VESA standards. Using a DP cable that is not VESA compliant may cause the
product to function improperly. Samsung Electronics shall not be held responsible for any
issues from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.