2012 Samsung TV F/W Upgrade Guide Samsung Electronics
Step1. How to prepare the USB Memory Drive 1. Download the firmware file from Samsung.com into your computer. File Name : T-MST10PAUSC.zip 2. Connect the USB Memory Drive to the USB port of your PC. Copy the file to USB Memory Drive. 3. Follow below steps to extract the file and make a folder for firmware. The folder should have same name with the file and exist in the root directory. (An extracting process might be different by application in PC) 3-A. Click the file and ‘Extract All…’.
Step2. How to upgrade the Firmware by USB 1. Insert the USB Memory Drive containing the firmware into the USB 4. The message for searching for update files is displayed. port of TV. Searching for update files… This may take a minute or so. 2. Turn on the TV and wait around 1 or 2 minutes. Cancel 3. Press the MENU button, select ‘Support’, ‘Software Upgrade’, and then ‘By USB’. 5. If the TV finds a valid firmware version, it displays the message below.
Cautions While upgrading, Do not pull the USB Memory drive out. Do not unplug the power cable. Do not turn off the TV. ※ Warning Pulling the USB Memory drive out or unplugging the power cable will cause a firmware error or main board failure. Firmware errors and main board failures are not covered by Samsung warranty policy.
How to Upgrade the Firmware by Online 1. Turn on the TV. 2. Confirm that your TV is connected to the Network by using the Network Status test. 4. The message “Connecting to the network server…” is displayed. Connecting to the network server… 5. If the TV finds a higher firmware version from the server, it starts downloading. Downloading 001010 version… 80% If you don’t’ press any buttons for 1 minutes After the download, the TV will turn itself off Automatically Cancel 3.
