Upgrade guide TV Firmware Upgrade Instruction

2. Turn on the TV and wait around 1 or 2
minutes.
1. Insert the USB Memory Drive
containing the firmware into the USB
port of TV.
3. Press the MENU button, select
‘Support’, ‘Software Upgrade’, and then
‘By USB’.
7. When the firmware upgrade is
complete, the TV turns off and then
back on by itself.
4. The message for searching for update
files is displayed.
Step2. How to upgrade the Firmware by USB
Searching for update files…
This may take a minute or so.
5. If the TV finds a valid firmware version,
it displays the message below.
Update from version 001005 to version
001010?
Yes No
6. Press Yes, then TV starts updating.
Updating TV software…
Please don’t disconnect your USB device before
the update finishes.
80%
Your TV software has been updated.
Your TV will turn itself off and on again
automatically.
OK
Cancel