manual do usuário

60
Testing for noise around the TV's built-in microphone
MENU/123 MENU System Voice Recognition Voice Control Environment Test
This test determines how well Voice Recognition will work in the TV’s current environment. Perform
the Voice Control Environment Test before using Voice Recognition to make sure it functions properly.
"
This function is only supported for the 9500 series model.
"
When you use the SEK-3500 series models of UHD Evolution Kit, the TV must have a built-in camera to use
this function.
1.
Run Voice Control Environment Test and stand within 4 m of the TV.
2.
Select Start to measure the echo level. If the echo level is suitable, the test will continue to the
next step. If this part of the test fails, remain quiet and try again.
3.
Select Start to measure the ambient noise. If the ambient noise level is suitable, the test will
continue to the next step. If this part of the test fails, remain quiet and try again.
4.
Measure the volume and clarity of your voice. Say "Hi TV," and then say the command on the
TV's screen loudly and clearly within 30 seconds. If the TV successfully recognizes your voice,
the test continues to the next step. If this part of the test fails, try again.
Checking ambient noise and illumination (Voice and motion control environment
Check)
MENU/123 MENU Support Self Diagnosis Voice & Motion Control Environment Check or
Motion Control Environment Check
You can test the ambient noise and brightness levels around the TV camera and microphone to ensure
that they are suitable for voice and motion control use.
"
The actual name may differ from specific geographical areas or models.
Using the voice recognition tutorial
MENU/123 MENU Support Voice Recognition Tutorial
The tutorial lets you familiarize yourself with the basics of using Voice Recognition. Run Voice
Recognition Tutorial from the Support menu, or run Voice Recognition and say "Tutorial".