Owner's Manual

- 101 -
Adjusting the clock for DST and time zone
Settings General System Manager Time Clock
Sets the right time by setting Daylight Savings Time (DST) and your local time zone.
● Time Zone
Selects your time zone.
" This function is only available when the Clock Mode is set to Auto.
● DST
Automatically adjusts for Daylight Saving Time (DST).
" This function is only available when the Clock Mode is set to Auto.
Changing the current time
Settings General System Manager Time Clock Time Offset
Time Offset adjusts the time through a network connection.
This function is available only when all the following conditions are met:
" Clock Mode is set to Auto, the TV is connected to the Internet through a local area network, and the TV fails to receive time
information through normal broadcast signals.
Setting the clock manually
Settings General System Manager Time Clock Clock Mode Manual
When Clock Mode is set to Manual, you can directly enter the current time. Select the Date and Time by using the
directional buttons on the remote control.
Using the timers
Using the sleep timer
Settings General System Manager Time Sleep Timer
You can use this function to automatically shut off the TV after a pre-set period of time. You can set the sleep timer
for up to 180 minutes after which it will turn off the TV.
" This function may not be supported depending on the model or geographical area.
Turning off the TV using the off timer
Settings General System Manager Time Off Timer
You can set Off Timer to shut off the TV automatically at a specific time. Off Timer is only available if the Clock has
been set.
" This function may not be supported depending on the model or geographical area.