Owner's Manual

Table Of Contents
- 104 -
System and Support
You can configure system and support settings such as clock, timers, energy usage and software updates.
Using the Time Functions and the Timers
Set the current time and use the timer function.
Settings General System Manager Time Try Now
You can set the Clock manually or automatically. Once the Clock is set, you can view the current time on the TV
anytime.
You must set the clock in the following cases:
The power cable is disconnected and then connected.
The Clock Mode is changed from Auto to Manual.
The TV is not connected to the Internet.
No broadcast signals are received.
Setting the clock automatically
Settings General System Manager Time Clock Clock Mode Auto
" This function works only when the TV is connected to the Internet or is receiving digital broadcasts through a connected
antenna.
" The accuracy of the time information received may differ with the channel and signal.
" If you get your TV signal from a cable broadcast receiver/set-top box or a satellite receiver/satellite set-top box connected
to an HDMI or Component port, you must set the current time manually.