DJ68-00094J (1.0) 10/16/06 9:25 AM Page 1 Operating Instructions VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully. Register your product at www.samsung.
DJ68-00094J (1.0) 10/16/06 9:25 AM Page 2 FEATURES Features include automatic cord rewind and dust indicator. NOTE : Not all models have the same features. IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING: Do not use the vacuum cleaner when rug or floor is wet. 3.
DJ68-00094J (1.0) 10/16/06 9:25 AM Page 3 IDENTIFICATIONS OF PARTS HANDLE SUCTION HOSE AIR REGULATOR CORD REWIND BUTTON DUST-FULL INDICATOR TUBE* POWER CONTROL SWITCH* & ON/OFF SWITCH CARRYING HANDLE BUTTON FOR SUCTION HOSE REMOVAL CLAMPER FOR DUST BAG COMPARTMENT FLOOR NOZZLE* RUG/FLOOR SELECTOR BELT-STRAP ASSY* CREVICE-TOOL HANGER ACCESSORY DUSTING BRUSH ▲ Features marked * may vary according to model.
DJ68-00094J (1.0) 10/16/06 9:25 AM Page 4 ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 2) Connect the suction tubes together (depending on model). 3) Connect the nozzle to the suction tube. OPTION : 4) Grip the body connector with one hand and squeeze the tube in an inward direction. ① EXTENDING : Holding the narrow part of the telescopic tube with one hand, pull the handle in the opposite direction with your other hand.
DJ68-00094J (1.0) 10/16/06 9:25 AM Page 5 ON/OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch. NOTE : ON/OFF switch is combined with POWER CONTROLLER - To start or stop the unit just lightly press it downward. POWER CONTROL(VARIABLE CONTROL TYPE ONLY) The vacuuming power can be adjusted to suit any situation with the electrical power control. MIN = For delicate fabrics, e.g.net curtains.
DJ68-00094J (1.0) 10/16/06 9:25 AM Page 6 USING & ASSEMBLING THE STRAP(OPTIONAL) ▼ This appliance is designed to be conveniently carried on your waist using the belt-strap accessory. When cleaning steps, curtains, shelves, etc, you can carry the unit with the strap over your shoulder. * 3) ▼ Ready for use 1) 1) Insert the lockers into the holes on the cleaner, taking care of the lockers’ direction. *Strap-ends should face the body of the cleaner.
DJ68-00094J (1.0) 10/16/06 9:25 AM Page 7 REPLACING THE DUST BAG 1) To open the dust cover of the dust bag compartment, press the clamper upwards.(The clamper is located at the front of the dust cover) 2) Remove the dust bag from the cleaner. 3) After removing the used dust bag, insert the cardboard bag collar of the new dust bag into its original position. 4) Press the dust cover down gently until the clamper relocks.
DJ68-00094J (1.0) 10/16/06 9:25 AM Page 8 USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. Select the carpet indicator ➀ when cleaning carpets. Select flat surface indicator ➁ when cleaning the floors, tiles, etc. FOR UNIVERSAL BRUSH Use the floor nozzle for cleaning all surfaces. NOTE: For optimum efficiency, clean floor brush with crevice tool.
