VC8600-RU 6/23/01 11:00 AM Page 1
VC8600-RU 6/23/01 11:00 AM Page 2
VC8600-RU 6/23/01 11:00 AM Page 3
VC8600-RU 6/23/01 11:00 AM Page 4
VC8600-RU 6/23/01 11:00 AM Page 5
VC8600-RU 6/23/01 11:00 AM Page 6
VC8600-RU 6/23/01 11:00 AM Page 7
VC8600-RU 6/23/01 11:00 AM Page 8 DJ68-00086C REV(0.
VC8615-EN 6/23/01 10:57 AM Page 3 Operating Instructions VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully.
VC8615-EN 6/23/01 10:57 AM Page 4 FEATURES Features include automatic cord rewind, dust indicator, cyclone, and sterilization lamp. NOTE: Not all models have the same features. IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING: Do not use the vacuum cleaner when rug or floor is wet. 3.
VC8615-EN 6/23/01 10:57 AM Page 5 IDENTIFICATIONS OF PARTS SUCTION REGULATOR REMOTE POWER CONTROL* (ONLY BUTTON TYPE MODEL) (ONLY SLIDE TYPE MODEL) PIPE FRICTION* CYCLONE FILTER* TUBE* DUST COVER FLOOR NOZZLE* RUG/FLOOR SELECTOR SUCTION HOSE* DUST INDICATOR UV STERILIZATION LAMP* CORD REWIND BUTTON POWER-CONTROL SWITCH OR ON/OFF SWITCH* HOSE CLAMP ❋Features marked * may vary according to model.
VC8615-EN 6/23/01 10:57 AM Page 6 ASSEMBLING THE VACUUM-CLEANER FOR USE *OPTION *OPTION 1. Slide the free end of the extension wand into the nozzle tube. 2. Slide the narrow end of one extension wand into the other extension wand. 3. Slide the extension wand into the handle end of the hose. 4. Slide the hose clamp into the suction inlet of the unit. * Option •Assemble the CYCLONIC FILTER with the handle and extension wand(depending on model). •Ajusting the telescopic tubes(depending on model).
VC8615-EN 6/23/01 10:57 AM Page 7 SUCTION POWER CONTROL(REMOTE POWER CONTROL TYPE ONLY) 1) REMOTE POWER CONTROL(BUTTON TYPE) The vacuuming power can be adjusted to suit any situation press handle control button. ON/OFF : Start or stop the vacuum cleaner. LOW/HIGH : Adjust the suction power by press the button. MAX : Clean at maximum power by press this button. 2) REMOTE POWER CONTROL(SLIDE TYPE) The suction capacity can be regulated steplessly by moving the side “A” to the desired position.
VC8615-EN 6/23/01 10:57 AM Page 8 USING THE ACCESSORIES CREVICE DUSTING • Crevice tool for radiators, crevices, coners, between cushions. • Dusting brush for funiture, shelves, books, etc. UPHOLSTERY • Upholstery brush for cushions and drapery. PARKING POSITION Located on the top rear side the vacuum cleaner, there is a nozzle support that can be used to park the nozzle during pauses in cleaning.
VC8615-EN 6/23/01 10:57 AM Page 9 CYCLONIC FILTER(ONLY CYCLONIC FILTER TYPES) You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it main-tain the maximum cleaning efficiency. The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter. So the dust bag contains only smaller ones. When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and cleaning.
VC8615-EN 6/23/01 10:57 AM Page 10 USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. Select the carpet indicator when cleaning carpets. Select flat surface indicator ➁when cleaning the floors, tiles, etc. FOR UNIVERSAL BRUSH Use the floor nozzle for all cleaning surfaces. NOTE: For optimum efficiency, clean floor brush with DUSTING BRUSH.