Robotic vacuum cleaner Operation manual of the product Precautions for safety are the contents to secure the safety of user and to prevent damage of property etc. Please read carefully to have proper use of the product. ※ This product has been made to be used in Korea, and the quality will not be guaranteed in overseas countries.
Features and advantages of product Realizing fine and uniform cleaning for every part of the room As the cleaning is conducted by following the lattice pattern ( ) with the ceiling image recognition method, cleaning can be performed for every part of the room.
Dust is removed by the rotation of dual side brushes. Threshold traveling Approx. 1 cm of threshold can be traveled with special driving system, therefore, all the rooms can evenly be cleaned. However, for the sake of safety, the threshold of more than 1 cm can not be crossed.
Contents Preparation Features and advantages of product .......................... Precautions for safety ......................................................... Items related with the power supply .................................. Before the use ......................................................................... During the use ......................................................................... Handling after the use ........................................................... Components ...
Always observe followings for safety These are the contents to secure the safety of user and to prevent damage of property. Please have safe operation by reading carefully of the following items. If warning items are not being observed, death or serious wound can be occurred to the user. If caution items are not being observed, wound or property damage can be occurred to the user. Corresponding terminology will be explained to improve the understanding for the product operation.
Always observe followings for safety Precautions for safety preparation These are the contents to secure the safety of user and to prevent damage of property. Please have safe operation by reading carefully of the following items. Before the use Confirm whether dust bin is assembled before operating the robotic vacuum cleaner. ▶ If dust bin is not assembled, the robotic vacuum cleaner will not be operated. Never operate the cleaner at the location where inflammable is placed.
efore the cleaning or B after establishing the reserved cleaning function, let all the persons in the house to be careful about these by informing them. ▶ Children can be caught and fallen by mistake while they are running. Remove in advance small or breakable object at the location of cleaning. ▶ Always remove these prior to the cleaning. Never let children standing or sitting on the product while it is in operation.
Always observe followings for safety Precautions for safety preparation These are the contents to secure the safety of user and to prevent damage of property. Please have safe operation by reading carefully of the following items. Before the use When installing the charger, do not expose the power supply cord on the floor. ▶ During the automatic electric charging or the passing in front of the charger, the robotic vacuum cleaner can be moved while drawing the power supply cord.
The robotic vacuum cleaner shall not be used on thick carpet. ▶ This can be the cause of failure of the robotic vacuum cleaner. ▶ The carpet may be damaged by this. Do not put objects on the robotic vacuum cleaner. ▶ Malfunction can be generated. Do not use the robotic vacuum cleaner on the table or on elevated place. ▶ If it is fallen, there will be the danger of damage. If sucking in wide paper or vinyl bag during the cleaning, remove them immediately.
Always observe followings for safety Precautions for safety preparation Handling after the use 추락방지 센서 추락방지 센서 추락방지센서 센서 추락방지 추락방지 센서 추락방지 센서 장애물 센서 측면 측면 측면 측면 회전솔 회전솔 회전솔 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 10 These are the contents to secure the safety of user and to prevent damage of property. Please have safe operation by reading carefully of the following items.
Carefully confirm the components.
Remember the names of each section.
Remember the names of each section.
Remember the names of each section. Name of each section ■ Remote controller preparation VC-RA52V VC-RL52V * SERIES VC-RA50V * SERIES VC-RL50V * SERIES The method to put in dry cell When purchasing the product, the dry cell is not existed at the remote controller inside. Assemble the dry cell (AAA type) and use the product. 1 2 3 Press the cover of rear side of remote controller and pull up it to upward Assemble the dry cell as shown the picture in the remote controller.
Remember the names of each section. 7 1 4 3 6 ⓐ 8 ⓑ ⓒ 9 Indicating section 1. Numeral indicating section - Expressing reserved time indication, progress status, and checking guide with numeral, English letter, and graphic etc. 2. Battery - Under charging: T he progressing state of charging is indicated with 3 stages and it will be increased by one column at each stage. - Under using: Remaining amount of battery is reduced by one column at each stage from the full state.
Confirm at the time of installation. Installation of robotic vacuum cleaner ■ Installation sequence Perform the installation in accordance with the following sequence. 1 Emergency switch ON/OFF I n order to use the robot vacuum cleaner, the emergency switch located underneath of the main frame shall be turned on. 16 2 Installing the charger In order to have charging, install the charger in the first place.
■ Installation of charger Charging lamp 1 2 3 4 5 Install the charger at the location where the floor and wall are even. Install the charger at the location where there are no obstacles around approx. 1m in front of and 0.5 m to the left and right side of the charger. Install the charger at the location which can easily detected by the robot vacuum cleaner. Installation of robotic vacuum cleaner Power supply lamp installation Evenly arrange the power supply cord along the wall surface.
Remember the installation method. Installation of robotic vacuum cleaner installation Observe the following sequence before inserting the power supply plug of charger. ■ Perform the charging Power supply 전원램프 lamp Charging lamp 충전램프 Power supply lamp Charging lamp When purchasing the product, the battery is in the discharged state, therefore, it shall manually be charged at the initial stage. Turn on the emergency switch located underneath of the main frame.
Get to know about the battery. ■N ickel-hydrogen battery which is not harmful to environment is used, and as it has over-charging protecting function, the battery can be used for a long period of time. ■ Warranty period of the battery is 6 months from the sales date. ■ When purchasing the battery, call to the customer care ) center and confirm the legitimate product mark ( and model name before the purchasing.
Get to know about installation method. Installation of robotic vacuum cleaner installation ■ Installation of entry prevention tape Always attach entry prevention tape at no-entry area of the robot vacuum cleaner. ■ Remove the vinyl tape before attaching it. 1 2 3 4 Attach the entry prevention tape at the area which has less than 5 cm of height difference with the floor. Examples) Veranda, rest room, low stairway, entrance door of porch etc.
Get to know about operation method. All functions of the robotic vacuum cleaner can be started or stopped. ■ All functions of the robotic vacuum cleaner can be activated when the emergency switch is turned on. ■ When the robotic vacuum cleaner is in operation, select the desired function after canceling the operation by button. pressing the Power supply ON/OFF ON OFF When using remote controller Remote controller: Press the power supply button. Main frame: Press the button.
Get to know about operation method. Returning for charging Using of robotic vacuum cleaner ■ Returning for charging The robotic vacuum cleaner can be returned to charger for charging by the charging return button. ■ When the charging return button is in operation, select the charging return button after cancel the operation by pressing the 1 button. Select the charging return button ▶C harging return will be performed as the main frame is turned on.
Get to know about operation method. Automatic cleaning Automatic cleaning will be conducted while moving by itself until 1 cycle of the cleaning is completed. ■ When starting the cleaning from the attached state to the charger, the movement is performed while the starting point is being remembered, therefore, the charging return time will be shortened. ■ When the battery is not sufficient during the cleaning, the cleaning will be started again by moving to the remaining area after the charging.
Get to know about operation method. Partial cleaning Using of robotic vacuum cleaner ■ Using of partial cleaning When small fragments of cake et cetera are being fallen, these can be cleaned easily. ■ Move the robotic vacuum cleaner to the place where partial cleaning is required. Main frame button Remote controller Sequence of setting 1 Setting of mode 1회 2회 ▶ 3회 4회 2 Canceling of setup use Under cleaning ▶ The area with roughly 1.5m of width x roughly 1.
Get to know about operation method. Repeated cleaning Even under the state of completion of cleaning, repeated cleaning will be performed until one column of battery is started to be flickering. ■ When starting the cleaning from the attached state to the charger, the movement is performed while the starting point is being remembered, therefore, the charging return time will be shortened.
Get to know about operation method. Manual cleaning Using of robotic vacuum cleaner ■ Using of manual cleaning Cleaning can be performed while directly moving the robotic vacuum cleaner with the remote controller. ■ Move the robotic vacuum cleaner to the place where manual cleaning is required. ■M anual cleaning can be performed with the remote controller only.
Get to know about operation method. Reserved cleaning Even in absentia, automatic cleaning will be performed at desired time. (available time of reservation: 23 hours to the maximum) ■ The reserved cleaning will be performed only when the cleaner is attached to the charger. Ex) When assuming that the cleaning will be started after 5 hours from the present time Main frame button Remote controller Sequence of setting 1 Enter to the reserved cleaning mode Icon is turned on.
Get to know about operation method. Using of robotic vacuum cleaner ■ Using additional functions 요. 하세 녕 안 More simple and convenient use of the robotic vacuum cleaner will be accomplished by utilizing various additional functions. ■A dditional functions can only be setup with the remote controller. Selection of voice (exclusive use for VC-RA52V,VC-RL52V* SERIES) Select desired voice guide by pressing the voice selecting button.
Get to know about cleaning and handling method. Perform regular cleaning. Always observe the following items. ▶ In the case when the emergency switch is damaged, call to the customer care center so as not to have danger. ▶ Do not arbitrarily modify the robotic vacuum cleaner or use any means or mechanical device to accelerate the deformation of its shape. ▶ Before the handling, always turn off the emergency switch at the bottom of the main frame.
Get to know about cleaning and handling method. Handling of robotic vacuum cleaner installation Regularly empty dust bin and take care of the HEPA filter. Always observe the following items. ■ Handling method of dust bin and HEPA filter When starting the cleaning, empty the dust bin in the first place. HEPA filter ▶ When separating the dust bin, be careful not to be spilt of the dust accumulated in the dust bin. ▶ Empty the dust bin under the following cases. 1.
When being blocked by foreign material, remove it as follows. When suction force of the robotic vacuum cleaner is weakened or trembling noise is generated, the cleaner may have been blocked by foreign material. Always turn off the emergency switch at the bottom of main frame before handling. As the dust on the dust bin can be spilt, separate the dust bin before handling the power brush. 1 2 3 4 5 6 Separate the dust bin by pressing the dust bin discharging (PUSH) button.
If side rotating brush becomes bent or dirty, take the following measures. When the bottom surface to be cleaned is rough or frequent wall surface cleaning is conducted, the side rotating brush can be bent or scattered. Handling of robotic vacuum cleaner ■ Handling method of side rotating brush Always turn off the emergency switch at the bottom of main frame before handling. 1 2 Confirm whether the side rotating brush becomes bent or foreign materials are adhered.
If foreign material is caught in the driving wheel, take the following measures. If the inspection code of 002, 003 are appeared on the main frame state indicating screen, take actions as follows. Always turn off the emergency switch at the bottom of main frame before handling. ▶ I f the robotic vacuum cleaner goes forward along a curved path suddenly, foreign material may have been caught in the driving wheel.
Always confirm these before reporting the failure. Confirming items before reporting the failure others Symptom If service is requested when it is not a case of failure, the service charge will be requested, therefore, read the operation manual carefully. Confirmation Corrective measures The robotic vacuum ▶ Has the dust bin been assembled? cleaner doesn’t ▶ H as the emergency switch been turned on? move at all before of state ▶ Has the cleaning mode the cleaning.
If service is requested when it is not a case of failure, the service charge will be requested, therefore, read the operation manual carefully. Symptom Confirmation Corrective measures The robotic vacuum ▶ Confirm whether the power supply plug of the charger has cleaner can’t find the been inserted to the outlet. charger. ▶ Take away obstacles within approx. 1 m in the front of and approx. 0.5 m to the left and right side of the charger.
Get to know about corrective measures for each inspection code. Confirming items before reporting the failure others inspection code If service is requested when it is not a case of failure, the service charge will be requested, therefore, read the operation manual carefully.
355 mm(Length) Product specification 93 mm(Height) 355 mm(Width) Main frame others 122 mm(Height) 275 mm(Width) 161 mm(Length) Charger 37
Product specification ■ Product specification Classification Mechanical specification Electrical specification others Cleaning section Item VC-RA52V VC-RL52V* SERIES VC-RA50V* SERIES VC-RL50V* SERIES Diameter 355mm 355mm Height 93mm 93mm Weight 4.0kg 4.0kg Power supply voltage Single phase AC220V/60Hz Single phase AC220V/60Hz Power consumption for charging 50W 50W Power consumption for main frame 25W 25W Battery specification 14.4V/2,000mA 14.
Dispose the waste electronic product as follows. Disposal with charge In the case of purchasing new product from an agency of Samsung Electronics and discarding the used one, it will be disposed without charge when delivering the new product. In the case of discarding the used product without purchasing a new one, it can be disposed by inquiring to the corresponding village office.
Memo
Memo
Memo
Service without charge ※In the case of use by converting to business purpose with general product, half of the warranty period will be applied. Contents of compensation Customer’s pattern of damage When failures on the performance, function are occurred under normal use state within the component possession period Within the warranty period After the warranty period Exchange of product or reimbursement of purchasing price When an important repair is required within 10 days after the purchasing date.
Operation manual Home page of the customer care center: www.samsungsvc.co.kr The cyber service center, in which reception of service and real time cyber consultation at the date and time exactly desired by customer can be realized, is operated. Customer consultation office 02-541-3000, 080-022-3000 ■Address: Internet home page http://www.sec.co.kr 271 Oseon dong, Gwangsan gu, Gwangju metropolitan city Samsung Gwangju Electronics Inc. ■Manufacturer: DJ68-00517B REV(0.
