Bruksanvisning

Get to know about installation
method.
Installation of robotic vacuum cleaner
installation
20
■ Installation of entry prevention tape
Always attach entry prevention tape at no-entry area of
the robot vacuum cleaner.
■ Remove the vinyl tape before attaching it.
1
Attach the entry prevention tape at the area which has
less than 5 cm of height difference with the floor.
Examples) Veranda, rest room, low stairway, entrance
door of porch etc.
2
3
Attach the entry prevention tape at 5 cm in front of the
places such as the fireplace, heater, heat of fire,
hazardous area, and the area with moisture etc.
Attach the entry prevention tape in front of the room with
the threshold of more than 1 cm. (attached to the living
room)
▶ Only the threshold of less than 1 cm can be crossed,
and if it is exceeding 1 cm, the robotic vacuum cleaner
can be caught at the threshold.
Attach the entry prevention tape as it is without cutting.
Entry can be happened as the robotic vacuum cleaner may not
recognize it otherwise.
● Detour can be conducted through detecting by the falling
prevention sensor as falling danger area of the zone with more than
5 cm difference with the floor, however, for the area with less than
that height difference, entry will be conducted as it is not to be
recognized as the falling danger area.
● The entry prevention tape can be purchased from the customer
care center
4
Attach the entry prevention tape at the handrail or
entrance of stairway et cetera with falling danger.
▶ If dust is accumulated on the falling prevention sensor
window, falling can be happened as the robotic
vacuum cleaner does not recognize the falling danger
area.
▶ If being fallen, injury or damage to the product can be
happened.