Bruksanvisning

22
Using of robotic vacuum cleaner
use
Get to know about operation
method.
When using buttons of main frame
When using remote controller
■ Returning for charging
The robotic vacuum cleaner can be returned to charger
for charging by the charging return button.
■ When the charging return button is in operation,
select the charging return button after cancel the
operation by pressing the
button.
1
2
If being wanted to stop in the middle of the charging
return, select the
button.
3
During the automatic charging test, press the charging
return button at 1.5 m in front of the charger.
▶ Confirm the installation state of charger.
- In the case when the charger is located at the place
from which the robotic vacuum cleaner can not be
induced.
- In the case when the distance between the charger
and robotic vacuum cleaner is more than 5 m: Long
time can be required for the charging return.
▶ Perform the manual charging for the following cases.
- In the case when installing the charger at recessed area
- In the case when the battery is completely discharged
- In the case when the robotic vacuum cleaner is being
locked due to obstacles (arrangement of furniture etc.)
- In the case when the threshold of charger installation place
can not be crossed (Height of threshold which can be
traveled: about less than 1 cm)
- In the case when “LO” is indicated while the remaining
amount indication of battery is flickering.
Select the charging return button
▶ Charging return will be performed as the main frame
icon
is turned on.
Returning for charging
Corrective measures when the charging return is not performed.