Bruksanvisning

Automatic cleaning
Using of robotic vacuum cleaner
use
23
Get to know about operation
method.
■ Using of automatic cleaning
Automatic cleaning will be conducted while moving by itself until 1
cycle of the cleaning is completed.
■ When starting the cleaning from the attached state to the
charger, the movement is performed while the starting point is
being remembered, therefore, the charging return time will be
shortened.
■ When the battery is not sufficient during the cleaning, the
cleaning will be started again by moving to the remaining area
after the charging. (the number of re-cleaning times: 1 time)
Under cleaning
Completion of cleaning
Canceling of
setup
2
1
Setting of mode
Main frame button
Remote controller Sequence of setting
1회 3회 4회2회
▶
Get to know about re-cleaning function
●
When being recognized that the cleaning is completed,
re-cleaning will not be performed.
● If arbitrarily moving the robotic vacuum cleaner or
manipulating the button while it is under automatic charging,
re-cleaning will not be performed since these are being
recognized as the completion of the cleaning.
Do not conduct arbitrary moving or manipulating the button of the
robotic vacuum cleaner which is in the cleaning operation. Since
these are being recognized as the completion of the cleaning, the
cleaning operation will be started from the beginning.