Bruksanvisning

Precautions for safety
preparation
8
These are the contents to secure the safety of user and to prevent damage of property.
Please have safe operation by reading carefully of the following items.
Always observe followings for
safety
Before the use
When installing the charger,
do not expose the power
supply cord on the floor.
▶ During the automatic
electric charging or the
passing in front of the
charger, the robotic
vacuum cleaner can be
moved while drawing the
power supply cord.
Install the charger at the
location where it can be
discovered easily.
▶ If installing it at
recessed area,
automatic electric
charging will be difficult
due to the excessive
unnecessary motions.
If an object is placed in
front of the charger,
automatic electric
charging can not be
performed by the robotic
vacuum cleaner.
▶ Take away the object.
Always insert the power
supply plug of the
charger.
▶ If power is not
supplied, automatic
electric charging can
not be performed.
Remove the obstacles
located in the vicinity
of approx. 1m in front
of and approx. 0.5m
at left and right side
of the charger.
Be careful not to have
the inflow of liquids
such as water, juice
etc. on the charger.
▶ There will be the
danger of electric
shock or fire.
Do not make short the
terminal of charger
with metals such as
chopsticks, driver etc.
▶ Fatal damage can
be inflicted on the
charger.
For the space with the
height less than that of
the robotic vacuum
cleaner (low sofa,
underneath of low bed
etc.), entry may
attempted or jamming
can be occurred,
therefore, attach the
entry prevention tape.
Do not use the charger for another
application.
▶ There will be the danger of fire or
fatal damage to the charger.